I love my LOD destroyer sliders. They are strong and durable and I have used them for 4 years. I glued and wired lights inside the sliders and connected to my interior light and they light up the step when I open the door.
when I adjusted my lower control arms. I parked the Jeep on my garage floor and engaged the parking brake. I put a bottle jack under back side of the front diff, there a flat spot there to support the diff and keep it from twisting. I remove the bolts on the control arms and lower the...
I remove my top using a few eye hooks in the ceiling of my garage and some inexpensive tie down straps. Works well and you can lower back in place easily when you want to reinstall your top.
My brother in law has a bronco ordered and he thought he would get it the first of 2021 and then it was pushed to spring of 2021 and now itās out until 2022.
I finally realized why the call it a Sasquatch package, there are lots of sightings and rumors but you never really see one off the...
Had a few jeeps over my lifetime all of which were old and beat up. When the new JL came out I splurged and ordered a JLU rubicon. Lifted it added tires and made it awesome. Didnāt last long before my wife was driving it as her daily and I was back in the family cruiser Ford Expedition. In...
In 2018 I bought a JLUR and loved it for the one week I got to drive it. Long short my wife loved it as well and I was back driving the family SUV. When the gladiator came out my wife really liked the Gladiator, she grew up driving pickups. We got her a rubicon gladiator. I got my Jeep back...
The one thing I love about Jeep is the mechanical simplicity. I can do lifts, new control arms, bumpers, steering and lots more in my garage with simple tools. Depending on your budget you have a big range in aftermarket support for jeeps. You can lift a JL for as little as $399 if your just...
I used to enjoy litebrite but they have turned into sales people and sales videos. Canāt blame them, I would do it if I could but really donāt put too much weight in their reviews. Ford has been very particular about the bronco videos released to this point. If the bronco ever makes it to...
I put the synergy brace on my JL early on and it has been a pain, the bushing keeps spinning and itās hard to grease. I purchased a second one for my Gladiator after synergy made some updates to the design and it installed much easier and I have had zero issues with it. I have always been a big...
Neil has help we with three jeep orders over the last three years. Easy to work with and is very straight forward, no surprises on any of my jeeps. Highly recommend Neil!
That seems like quite a bit of caster. I wonder if the drive line will vibrate in 4WD at speed. In 2WD it wonāt matter because of the FAD. Youāll have to let us know how it goes.
https://www.northridge4x4.com/part/stabilizers/8807-03-synergy-manufacturing-steering-stabilizer-relocation-kit
You can use this to mount any SS to a tierod thatās 1.5ā diameter. The bolt will replace the bolt holding the end of the track bar to the axel.
Thatās the best explanation Iāve seen on the issue. Iām not a machinist but I have suspected the aluminum housing and bushing arenāt staying perfectly perpendicular to the nut causing the squeaking and the bushing twists in the aluminum housing.
I have repeatedly checked the torque on the...
Like many of the comments above I have experienced several times when it starts creaking and I have taken it off and add grease. The bushing spun so I had to drill a new hole for grease. That little hex head bolt on the back has been a PITA, I finally replaced it with a grade 8 bolt so I...
Yes you can use the BD wiring harness but itās basically for wires and the relay. I had the BD harness and it was used mostly for the wires. You will have to wire it according to the BD diagram and it actually wasnāt that difficult. It works perfectly with Aux1 turning on the low beams and...
I followed the schematics and built my wiring harness and tested it prior to plugging it into the lights and it works perfectly. Low beams on aux1 and high beam on Aux 2. If I happen to have both switched on it defaults to high beam. It was straight forward and only took me a couple hours...