HI Tagoren06 sorry for the delayed reply I've been on a remote jobsite. The rubber pads I received don't line up well with the cable either.
REAR WHEEL I have aftermarket rear fender liners. I mounted one light on each rear wheel well using the supplied rubber pad. Secured using bolts to the...
I installed Quake LED Rick lights. Easy install I used a combination of zip ties, screws, and rock light magnets to mount the rock lights. Routing cables was simple. I had the power connected straight to battery and on/off using the rock light app on my phone, but I had a a small parasitic...
yes. I used my stock TPMS sensors. The inflator valve the TPMS is attached to is the same usual valve used everywhere, it just has a red cap over it to protect it from rocks.
I have aux switches, some are already in use, and will move sliders to aux. I'm going to reroute my GMRS through the firewall so I can free up the power port for the front camera, and remove the CB wiring from firewall. A coworker damaged that thick wiring going through the passenger...
This easily plugs into the existing 12V power source behind the center console. Installation took me less than 10 minutes. https://www.quadratec.com/p/quadratec/12-volt-power-adapter-jeep-wrangler-jl
I really like this radio. I have the radio mounted under the passenger seat, and ran power under the center console into the dash and used Quadratec's power adapter https://www.quadratec.com/p/quadratec/12-volt-power-adapter-jeep-wrangler-jl and the mic is mounted using a Mag Mount.