Search results

After a couple of weeks fine-tuning the design I finally finished installing aftermarket seat heaters on my JLUR. Initially I used a kit I bought on Amazon that used buttons for controlling the heating elements, but the problem with that was that I couldn't use remote start to pre-heat the seats...

Btw, the red wire came with a 15amp in-line fuse, is it ok to remove it since I’ll be connecting the white wire to the tap-a-fuse on 57 and I’m using a 20amp fuse on it?

Thank you! Will do it right now. Cheers, Mauro

I managed to get the cable through the firewall (thanks for the helpful link!) and I have it next to the PDC. I also got the fuse tap from Amazon (thanks again!) If it’s not too much to ask, could you help me figure out how to wire it so that the heaters only work when the engine is running? I...

BTW, does anyone know if there's some place I can run the wires through the firewall on the RIGHT side of the JL (around the area behind the glove compartment) to reach the PDC?

Yeah, only printed the red part... :-)

Thanks!

Thanks! And thanks for helping out! I have one more question if you don't mind... The kit I bought (you can see it here: https://www.amazon.com/dp/B07FKNK6XD/ref=cm_sw_r_cp_tai_FEoXCbNSZ2Q84) has a fuse inside the black box you can see attached to the red wire in the pic below. Do I still need...

No aux switches, but I 3D printed custom buttons and used the trim from an aux switches module I bought online (see pic)

I did not know that. Do you know which fuse location on the PDC is the one for heated seats?

Hello, I have bought a carbon fiber seat heater kit on amazon that comes with pads for the front seats and I could use some help figuring out what to connect it to. The instructions say the three wires need to be connected to battery positive, battery negative and ACC. Does anyone know of...

Thank you. Any steps to perform to avoid issues with side airbags? Cheers

I will be installing an aftermarket seat heaters kit on my JLUR and I’m having a hard time finding guided instructions on how to remove the front seats and the leather to place the heating pads inside. If anyone could point me in the right direction I’d very much appreciate it. Cheers, Mauro

You can actually buy just the button bank on Mopar sites using the part number 68317694AE, it just doesn’t say if it’s black or silver.

Hello, I am trying to find the specific part number for either the AUX Switch bank IN SILVER (please note, not the whole kit, just the buttons bank itself), or, even better, just the silver trim around the buttons. I have found the bank for sale in multiple sites using this part number...

Would you be willing to share the illustrator file for the vinil pieces? I own a Cricut too and can’t stand the whistling anymore... Thanks in advance

Bump

Could you please provide more info on the brand/model of this? Thanks in advance!

Does anyone know if there is any way to install original Jeep heated seats to a 2018 JLUR after delivery? I will be moving from the Bay Area to Boston in July and... boy do I regret not ordering my Rubi with it! Thanks in advance.

Can you please tell me what I am doing wrong then? I received and installed the new one you guys sent me but my visibility is still pretty reduced (see picture) Mauro