Search results

Are the clutches even in play when the TC is NOT in 4A? (Hopefully someone who has practical knowledge can respond).

Don’t forget that he used his 392 to TOW a fully equipped overlanding trailer on and off road (Not really sure how many miles with the trailer). Towing undoubtedly increases TC clutch wear here (inference). A light trailer on pavement increases it a little, a heavy trailer on challenging...

Late to the conversation but theres a better way… If you want a clean hole in ABS and many other plastics DON’T DRILL. Heat up a short (maybe 3” or so) piece of pipe (copper typically works well) or a sacrificial thin wall socket of the desired OD and melt the hole into the plastic (hot punch...

Jeep” and in words of doc holiday i thought to myself why your no daisy no daisy at all You are a razor on tracks🤣 until that moment i did not know such a thing existed 😂 He was saying that despite his inability to keep going he wasn’t a poorly prepared unskilled snow wimp. The reason he...

Chains are great tools for many difficult snow wheeling situations BUT … - They have to fit properly. - They have to be secure. - You have to change the way you drive. - You may lose the ability to turn to the stops without tearing things up. They can do a lot of damage to your vehicle if...

Attn Canadians: What happened to the requirement that all new cars be equipped with block heaters? I’m pretty darn sure that in 2012 it was the law (I thought throughout Canada). I learned this when attempting to get a block heater for my 2011 infiniti G37x and there was no US part available…...

Sounds a lot like loose lug nuts. My money is on rohdawg for the win.

Contract a seasonal plow truck service. Inexpensive for a short driveway, nothing to store or maintain, not your problem if something gets destroyed. Do it by the season and make sure that you get a guarantee that they’ll plow within x hours every time there’s more than x” of snow . If you do...

Maybe the original winch installer removed the clips. It’s not uncommon for folks to do that. If so you’ll be able to slide the grill up after the other clips are loose. If the center clips are still there and you end up removing the grill, use a hot knife (any piece of thin metal - like a...

CDC got a lot of input from the dog community and recently walked back this change. They actually simplified the dog import requirements as long as you are coming from a rabies-free low risk country (which Canada currently is.) Looks like there’s currently no fee, no health certificate, no...

It may be fortunate for Mr. Business that you’ll be crossing back into the US prior to Aug 1 as the entry rules for dogs become more complex that day. He probably has all of the required elements for the new rules but there’s potential snags with the microchip type and install date vs rabies...

Great work area @Atomic-Mouse. @GoatHerder check out garagejournal forums for a few thousand hours of reading on tools and workshops from the practical to the over the top insane. There are many good threads and ideas about organizing tools. You can find great info without spending too much time...

Your phone has access to more data. Your phone has better software. Your phone has more computing power. Your phone is magic…. well pretty much. GPS position accuracy is improved using differential correction. Jeep probably doesn’t have access to the data needed to make those corrections...

@JeepCares What was the end result of this? Ideally you have a link to a thumb drive compatibility/format/processes whitepaper and cheat sheets to distribute. Thanks in advance.

Thanks Javwhohl

I'm looking for feedback from folks who have removed the 4 lower middle grill tabs for easier grill removal as shown here: Does the grill rattle after doing this? Is it flexing into the winch and wearing the paint off? Are you glad you did it? Thanks

Incredibly hot. Hope this wasn’t you. East of San Diego today Don’t have any details- hopefully someone can fill in the blanks

I’ve always wanted a good handling machine… something I can take to the track on weekends.

This is valid. When a bear is charging you - the profile is predominantly head. A head with a thick conically shaped skull that a bullet (or slug) are unlikely to penetrate. You'd probably succeed in stopping the bear if the shot was directly on the nose as there would be little deflection...

I’ve always been told .45s and .357s are significantly underpowered for dropping attacking brown/grizzly bears. I’ve heard that in bear defense classes and from a variety of sources with less expertise. The only gun I’ve heard recommended in training is a 12 gauge with slugs. It used to be...