My other Jeep is a 94 Wrangler YJ. I replaced a lot of stuff on it, one of the parts were the leaf springs. For what it's worth, I used the Crown LSK4 spring kit, which is a 1.5" lift. I *believe* the lift gets lifted from the dog leg/boomerang shackles.
I was wondering if I could swap the...
I have about 35k miles on my JLUR and it's all stock. I added a winch when I bought the jeep 4 years ago so there's a bit of weight on the front.
Last year I noticed a dull pop on the drivers side when turning left into a parking spot. It went away so no big deal. A year later, I would say...
OK, so my drivers side inner fender always was wonky. It would rub against the frame so I trimmed it a bit...but VERY little... Then a little bit more. All in all, I'd say I took about 1/4" off the area that rubbed. Got home from my last big trip an now there's a big hole where the liner...
I have a dashcam that I love so that I can go back and check the GPS and view the trail. I've been doing this for a couple of years, but now I'm thinking about a 360 camera for that streetview experience on trails.
I'm wondering if anybody else has done this, and if you have some examples of...
Just bought jscan yesterday and I'm playing around with it. Is there a way to export the live data that was gathered, along with the timestamp? I'm not seeing an option for it but it could be useful.
I have a 2021 JLUR and so far the door hinges are fine. Unfortunately though, one small area on the hood near the hinge is exhibiting the corrosion issues. I've delayed this a bit and want to try to work it into the schedule so I'm not without my Jeep for vacations.
I'm in the Chicago area...
I have a trailer that I ended up changing the bearings on. One side there was a lot of play in the tire. The other side there was no play but yet I figured why not change both.
For what it's worth, I used Timken's set 12 and set 13 for the bearings. I watched tons of youtube videos on how...
I have a pixel 8 and connected to uconnect over bluetooth. I've noticed that if I receive an RCS message, I don't get a notification and the messages/contact isn't even showing up in the "message" section of the head unit. I've noticed that messages received by SMS show up fine.
Google...
I'm in the beginning stages of thinking about possibility getting a new Jeep. One thing that isn't totally clear is what's included on the Rubicon's Xtreme 35-inch tire package. Questions in particular:
- Does it come with iron knuckles?
- Does it come with the mopar 2" lift or something...
I have a Jeep with eTorque, and while I've never owned the ESS version, I'm very happy with it. As we all know, eTorque is now gone from the Wrangler lineup. Do we know why Jeep got rid of it?
I've been unable to find answers to this. Some say it's supply chain issues. Others say it's...
I went offroading last weekend and was doing my post-ride check. I noticed that there was a piece of wood jammed between the front differential cover and differential, kind of where the gasket is. I just sprayed fluid film yesterday so everything is still wet and greasy looking.
Can anybody...
I do a pretty good job cleaning my Jeep but one area that's difficult is the grill, where the inserts are. I just have the stock grill and inserts, nothing fancy. But the vinyl/plastic inserts have mud/clay stained on them.
Short of spending half a day sticking my finger in each opening...
I have a Weathertech cargo mat with a tailgate table. The mat squeezed under the table in most places, but I am seeing it start to curl up because it doesn't sit under the table anymore. I talked to Weathertech and they are unable to custom size a mat or do anything because it's an aftermarket...
I was on vacation over the weekend, driving around the mountains. I frequently switched over to the manual mode on the transmission to let the engine do some of the braking instead of me. I've driven manual for years and the engine was operating in the normal rpm range; probably not more than...
I'm thinking of mounting an iPad mini in my JL to be used for navigation near the passenger side. I like the low profile 67D rail for the JL, but there seems to be numerous mounting options.
My goal is to mount it low so I don't lose visibility out the windshield. What length arm do you...
I have a 2021 4 door Rubicon with steel bumpers and a winch with a synthetic line and the stock ko2 tires. I would like to verify my height to see if there's something weird going on. Maybe it was me being next to a bunch of lifted jeeps but something just seems off to me. One guy even asked...
I'm getting my Jeep ready for summer trips and noticed that the outer tire lugs are somehow mangled up. I have another tire similar to it but it's not as bad. I was wondering if anybody knew what caused this. I do 5 tire rotations and I think that these were the two front tires that I had up...
I've been battling what I feel like my Jeep being all over the road. I've tried lower tire pressure, and that didn't help much. I also used a digital angle measure on the two holes next to the pumpkin, and it was about 89.8 or so degrees. I finally went in to get my alignment numbers this...
I was checking the torque on my lower ball joints today and the nut seemed to rotate when torqueing. I'm presuming this is normal behavior, since it's a ball.....in a joint... and mopar put a little spot on the end of the ball joint stud to put a wrench on to prevent spinning when torqueing...