I posted this on the Gladiator forum to show them how I ran it with my setup. But Iāll be doing a complete in depth install on the JL this week.
https://wolfbox.com/?ref=nficeybp
I went with Diodedynamics and removed the factory LED. I need front turn signals and DD have them built in
Only 15,000 miles on these no cracks or leaks
$650 pick up in Vacaville
Removed this since I went with the Teraflex tire carrier.
This is the Metalcloak piece which doesnt have any logos of designs cut into it.
The Spare Tire 3rd Brake Light Mount for the Jeep JL Wrangler utilizes the factory 3rd brake light and mounts it to the center of the spare tire wheel...
I figured this was a basic plug and playā¦. I have factory Alpine setup and only running additional amp for the MB sub. I figured I leave all the PAC dip switches in up position. Powers and grounds all connected, red light on pac unit is on and blue light on amp is on but I get absolutely no...
Iāve decided to stick with a more traditional look and keeping the Metalcloak Lo profiles.
bought the oracles June of last year. Iāve only got 2000 street miles on JL so theyāre practically new. I donāt want ship these so Iāll try and keep it local for now. Pick up in Vacaville,ca
$390 cash or...
Iāve been asked about the plate I made. I was waiting until I had spacers made instead of stacking washers. I took the factory bolt and went to Loweās for a longer one of same pitch, sorry I forgot the specs.
Mount can be placed on driver or passenger side. Mount is not drilled since Iām not...
What do you think. Itās solid 3/16ā plate Iāll paint the top portion fully but the bottom Iāll leave partially exposed for the antenna to ground to the plate. But itās freakin solid. Iām thinking in the future I can always expand this mount if I ever feel the need to mount anything else.
Just posting this to see who's down to roll out there I post on IG a lot @svcwelds , and figured why not post on here and see if we can get a little meet and greet on here. They open at 10am and serve brunch til 12pm but serve food and drinks all day ofcourse.
Removed with maybe 400 miles. I was planning to buy a 3rd jeep and use it but went another route.
pictured are the springs, shocks and sway bar end links. Iāll give you the trackbars and control arms too.
$550 , pick up in Vacaville, CA
Ordered 37s so these are coming off next week. Pick up in Vacaville, CA.
Date code 10th week of 23
Only 800 street miles , spare is new.
$1400 for the set, cash or PayPal if you cover the fees.
edited: Just dismounted today 900, Miles on them
Installing the @Metalcloak skids on my Gladiator (will be adding these to the JL too for sure now). I didnāt have to drill the frame as mentioned in the instructions for the driverās side. But Iām running Nemesis inner front liners so Iām having to wrestle at the motor mount bolts for the oil...
Metalcloak ās JL/JT Front Bumper base and winch plate along with the 46ā crawler caps.
Installed this on my brotherās gladiator. Heās just saving up now for lights and winch, figured Iād share some pictures with dimensions if any was curious since I donāt see these around much.
I figured Iād best make my own thread too.
Just pick up June 7th. I also have a 2021 JT Mojave so I might sneak in a few pictures here too.
So far Iāve replace the front inner liners with Artec front liners which I removed off the Gladiator. Glad I didnāt cheap sell them!
Iām in the process of...