Search results

Found on top of passenger side floor mat, has a bit of white grease on it, two gear sides and the gear turns. The largest gear diameter is about the size of a nickel. TIA

If you haven't voted in the sexiest Jeep contest, it's a close race, and we all know the 2 door is sexiest, so get over here and do it!!! https://www.jlwranglerforums.com/forum/threads/sexiest-jeep-alive-2024-final-round.126871/

Doesn't say winches excluded from coupon, so maybe :) https://go.harborfreight.com/email/2023/08/labor-day-sale-25-off-any-single-item-182055/

And still comes in a 6MT FTW!!!

Using a dial gauge from Harbor Freight you can get your caster reading in a few minutes and just a few bucks :) https://www.harborfreight.com/dial-gauge-angle-finder-34214.html Just get a zero baseline for your gauge and your floor as it may be off a degree or more (like mine is), use a long...

Wanting longer end links after I install a teraflex 1.5" spacer kit combined w/ my Rubicon springs and Fox 1.5" lift shocks. Looking at these they don't appear to be too long, was hoping for something just a couple inches longer than the stock JL end links. TIA if anyone can help...

Picked up a M220 w/ LSD from a Sport, since I have the axle off the Jeep I was thinking of just welding up a simple angle iron truss. Just wondering if this would be a decent plan. I have a MIG welder and can fab the truss from 2" (1/4" thick) angle iron. I was just thinking I could run the...

This is the perfect set for all of us, finally someone gets us!!! If you ever run out of a 10mm socket again you can't blame Harbor Freight :) https://www.harborfreight.com/merchandising-promotions/new/10mm-metric-essential-socket-set-10-piece-58957.html

Now that the JL (and I assume the JT also uses the same visor crap) has been out for several years. Check the best box that applies. And if you don't have any broken visors please check that box. TIA And for those that may need a fix now or in the near future, check this great "fix" thread :)...

I know the market would be limited but it would seem fairly easy to manufacture and with the popularity of the Gladiator I think there would be enough interest out there. TBH I would love to have a 2dr Rubicon Gladiator, I don't need anything more than that for hauling or storage. The current...

Good time for a winch, lights, welder, pressure washer, etc :) Looks like jacks, compressors, and a few other items are exempt though :( https://www.harborfreight.com/promotions

For my needs it seems that going w/ the 4:1 T-case would be a good move. I essentially get "almost" as good a crawl ratio w/ the Rubi w/4.10 gears. I wouldn't have to pay to get regeared so I could DIY the T-case install as I'm nervous about DIY'ing the ring & pinions. And it would essentially...

When rock wheeling a few months ago had a slam on a rock and got hung up a bit, went out to check where to try again and noticed a coolant smell. Never found any obvious leak and didn't really notice much difference in the coolant tank level. Still notice a very faint coolant smell when the...

Installed the Mastertop Tonneau cover & WIndjammer combo. https://www.quadratec.com/p/mastert.../msp-wind-tonneau-combo-jl-2-dr-hardtop-twill Thanks to @Billkowski for the info and the Twill choice, it is a nice cloth for sure. Pretty easy install, that final stretch to get the opposite side...

This thread is for the lowest hanging fruit on the Jeep Club tree :) We don't have the high dollar shoes, the name brand jeans or sit in the VIP section. We're in the back of the line, we have to wait a bit longer but damn-it, we're still getting into the club! We get to start with the...

Lots of folks suggest using hockey pucks for bump stops. Never found a thread on the site w/ the details, it's simple enough but thought it may help those that haven't done this or considered pucks for bump stops. Thanks to @Roky for suggesting bolting them on, there's others that have used...

Had the halogens, went to an ebay multi LED set which had a horrible cloud-like cutoff, very poor illumination width, and overall poor lighting quality. I then went with a low lumen projector-type LED set w/ a decent cutoff but light output was poor as was the width of illumination, and the DRL...

Did a search w/out luck :( If so, part #s and price??? TIA :)

I'm sure it's been done, and probably some huge thread on the site already exists, but haven't had luck w/ a search, even on google. I have the 7" Uconnect and I've heard there's no way to run another camera along w/ the reverse camera, only the 8.4 has this option via a Tazer. I was wondering...