Sponsored

Search results

  1. SOLVED! Help Identify Popping Noise In Steering

    Update: Noise was coming from axle side trackbar mount, appeared to be too tight and slightly worn trackbar. I cannot tell where this noise is coming from. I just noticed it yesterday when parking for food after a 10 hour trail ride day so I’m assuming that has something to do with it just now...
  2. Rear Antirock & Brake Lines

    For you guys with rear antirocks did you leave the brake lines on the outside of the rods or did you move them to the inside. When it’s all bolted up the ABS line seems fairly snug so I played with leaving it outside or moving it inwards and was more worried of it getting snagged on the bottom...
  3. Fox 2.5 Elite DSC Riding Too Stiff?

    Just threw on my new 2.5 elites from Accutune yesterday and when driving to and from work today they felt extremely hard. (Running them fully open) I went with the adventure tune and told them I’m pretty much at stock weight I still even have stock spare tire but plan to upgrade it to a 37 when...
  4. Gazelle T3X vs T4 tent size comparison?

    Looking at both of these tents but it’s hard to tell the size difference online. Has anyone had or has both they can comment on the size differences. Any photos of the tent would be greatly appreciated. Thank you!
  5. Florida Mile Marker Rhino Pull Winch $350

    Brand new in box Mile Marker winch. Will ship if you cover it.
  6. Florida JLUR Suspension $100

    Springs & Shocks
  7. Florida JKS 1.5 Lift Kit $600

    Front & Rear Springs Front Lower Control Arms JKS Quicker Disconnects
  8. Antirock Heim vs Sealed Rod Ends

    Just picked up my front Antirock kit and I noticed it came with sealed sway bar end links but I thought it came with the Heims default. No biggie but it made me wonder on Heim vs sealed ends will I see any differences with the sealed? Will I see less articulation or maybe better on road...
  9. Asking for Suggestions: Sway Motor High Clearance Skid

    Does anyone make a minimal front skid plate that covers just the sway motor? I wanted to flip it up and cut those hanging brackets but my winch plate interferes. I have the RR Arcus front bumper and love having the electric sway bar so don’t want to leave it exposed but I’m looking to increase...
  10. Florida Sold: Looking for OEM Steel Skid

    Trying to find factory front steel skid plate.
  11. Cabin Filter Upside down or Normal amount of sand?

    I saw sand in my glove box so I want to check out the cabin filter I just put in a few months ago and I saw mounds of sand built up along the edge when I pulled off the cover. When I pulled the entire filter out all the grooves were filled quarter way with sand. I suppose it’s doing its job...
  12. Axle Tube Seals

    How have aftermarket seals worked for you compared to the plastic stock ones. Are the rcv branded worth it?
  13. Build Advice Please (40’s)

    TLDR: Someone tell me why 40’s is a horrible idea lol. If I can run 40’s securely on stock Rubi axle housing with rcv 300m shafts I’ll do it. If a 60/80 swap is strongly recommended I’ll stick to something smaller for now and budget accordingly. I’m currently on 35’s building up my Jeep to...
  14. Hunt for Reid Racing Knuckles. Can you help?

    Ive called around trying to find anyone with these steering knuckles and everyone’s only got the flipped link in stock. Reid Racing said a lead time of 6-8 weeks and it’s not garunteed and recommended calling poly performance or premier products. Called them up and they’re out too. I originally...
  15. 2nd Oil Leak in 2 months! Filter Housing?

    Was laying under the Jeep checking something else out when I noticed my oil filter was shiny and covered in oil. No droppings on my driveway and it’s my DD so not sure when/how or how much oil is actually leaking but crazy this is my second leak in less than 2 months. My front crank seal was...
  16. General Consensus On Brakes & Pads?

    Question: Are Mopar pads the best or good enough to buy again? I hear nothing but great things about Mopar pads but my rear is completely worn out at 35k is that normal? On Monday I started getting this horrible squeal coming from my brakes, I’ve since taken all four apart and regreased all the...
  17. Should I wait to install Tierod & Draglink?

    My new tierod and draglink will be arriving tomorrow and I wanted to do it all while I have off for Thanksgiving but the last couple weeks I’ve been having the ball joint popping noises so I am planning on changing those out sooner than I thought. Should I just wait another month or two and do...
  18. Metalcloak UCA Rattling?

    My MC UCA just arrived in the mail and upon first inspection I notice this rattle noise from the frame side bushing. None of my other arms have done this and the other uca that came with does not make a sound. Any MC guys know what this noise is and will it stop after installing or should I take...
  19. Aluminum Steering w/ Fox ats stabilizer

    Tie rod and draglink is my next upgrade and I want to skip straight to aluminum “2.5 ton” steering but have read a few things about the larger diameter and fox ats causing issues. I’m only at 2.5 inches of lift but would like to make this work. Who’s running aluminum steering and the fox ats...


Top