Search results

  1. North Carolina Rough Country Spare Tire Relocation Bracket for JL

    I have a basically new Rough Country spare tire relocation bracket for sale. It was mounted to my jeep for approximately one month and then removed because I went with a whole tailgate reinforcement system. It looks brand new and has all the necessary mounting hardware. I'm sure shipping...
  2. What size are the mounting bolts for Smitty X20 10K?

    Hey guys. I just installed a Smittybilt X20 Comp 10k winch. May be a little over cautious, but I want to replace the factory imported (Chinese) mounting bolts with good US made grade 8 bolts and square nuts. Does anyone know the exact size of the bolts and the square nuts that SB provides? I...
  3. Smittybilt XRC Gen 3 9.5k and stocked steel bumper with mopar Grill guard

    Not the exact same model but very close. I just installed the SB X20 in a Mopar steel bumper with the Mopar winch guard “hoop”. Fits great, nice and compact, I love the look. Solenoid pack is mounted dead center on top of the winch with plenty of clearance. I used the Maximus 3 winch plate and...
  4. North Carolina New in box Smittybilt Pivot HD tire carrier and tailgate reinforcement

    I am not. Thanks for the heads up. I’ll look into that.
  5. North Carolina New in box Smittybilt Pivot HD tire carrier and tailgate reinforcement

    Hey guys. Bought this last week on impulse and something else has come up. I’m trying to recoup a portion of the funds spent (for now). Quadratec sells it for $599, I’m asking $500. Mine is new in the box, but the top of the box has been cut off to inspect it. I’m in Charlotte NC looking for a...
  6. Georgia Teraflex Jeep JL JLU Alpha HD Adjustable Spare Tire Mounting Kit 4838 - $300 (Rockmart, GA)

    I'd be a buyer for $200 shipped to Charlotte NC. If you get to the point where you want to ship it, let me know. Thank you.
  7. Mopar CAI kit installed on JL today. Feedback / review.

    I have tried Bank’s “Ram Air” and the Mopar Kit. The Bank’s Kit sounds really aggressive and I liked the tone, they also claim one of the largest HP gains. It just ended up being too loud for my liking. The Mopar adds a little deeper tone but is nowhere near as loud. I think I notice a little...
  8. Mopar CAI kit installed on JL today. Feedback / review.

    Not sure who makes the filter, but it’s definitely on par with K&N. It’s to be cleaned with a mild detergent and water. Flush it out in the opposite direction of the air flow as to not imbed dirt deeper into the element and do not spray with high pressure water. Just rinse in the sink or with a...
  9. BLACK Wrangler JL Club

    The cradles are the Thule Hullavators. Highly recommend them as well. I’ve carried everything from my Bonafide SS127, Hobie Compass, and even a 19 Hobie Outback with some slight modification to the width since the Outback is heavy and wider.
  10. BLACK Wrangler JL Club

    Thank you. I’m super pleased how it came out. The rack system is the Rhino Rack Backbone with the low mount Vortex bars. Lots of guys run this system with the Pioneer Platform for extra storage or a roof top tent. It has internal steel framing to allow for a much heavier load than just the rain...
  11. BLACK Wrangler JL Club

    Not an action pic, but just installed the Mopar 2" lift, Mopar simulated beadlock wheels, and 35" Nitto Ridge Grapplers on my 18 Sahara. Been waiting a long time for this day!
  12. North Carolina Rubicon Takeoff suspension

    I have a set of Rubicon takeoff suspension for sale. It came off a 2019 hard top Rubicon JLU. It was removed by the dealer and sold to me. I installed it on my 2018 Sahara and put 15,000 miles on it. It lifted my Sahara about 1.25”. I also have a set of Rough Country .75” front leveling spacers...
  13. Mopar simulated beadlock wheels, does this look normal?

    Thanks for going through that effort to check. I agree, yours do not look as thinly coated as mine do. But I don’t think it’ll be visible unless you are looking for it on mine. I just expected a little better from a $300+ wheel. Can’t wait to put them on, I had my rings powder coated in a deep...
  14. Mopar simulated beadlock wheels, does this look normal?

    Ah, that makes sense too. Thank you for the input.
  15. Mopar simulated beadlock wheels, does this look normal?

    Hey guys. Bought these Mopar simulated beadlock wheels from my local dealer and when I opened the cartons I noticed that the paint, or powder coat is not sprayed uniformly all the way into the lug nut cavities. My thinking is that these wheels are too expensive to have any “defects” at all. What...
  16. North Carolina Sahara Factory Wheels and Goodyear Kevlar A/T Tires

    I have a set of 18" factory wheels and tires from my 2018 Sahara. The wheels are in great shape with zero curb rash and have never been off road. The 255/70r/18 Goodyear Wrangler A/T tires have right at 20,000 miles on them and appear to still have about half their tread. They have been 5 wheel...
  17. Looking for a new or like new Mopar 2” lift kit.

    Hey guys. I’m in the market to lift the Sahara and have decided on the 2” Mopar Kit. Anyone have a new or like new one they’re looking to part with near NC? Thought I’d try to score one on the secondary market before buying new. Only interested in the Mopar 2” kit for a JLU with 3.6. Even...
  18. What happened to Insane Audio's JL3001 head unit?

    Tagged for possible future purchase. Looks promising for sure.



Advertisement
Top