Search results

My concern would be the springs could get loose without the spacers once you install the Rocksport shocks.

So far, so good. 👍 I will note that mine is a Rubicon with the 3.6 E torque - where yours is a 4xe Willys, so you may want to research whether you have the exact same springs as a 3.6 Rubicon XR. If they're not, I can't say for sure if it would work for you. I maxed out each side with a hi-lift...

HK Offroad JL shackle tab kit. Pricey and kind of a pain in the ass to install, but built stout. Uses 4 larger than factory bolts on each tab to tie into the frame. Only good solution I found when I was trying to find something to use with the factory bumper. Buy once, cry once.

As others have said, do it yourself with Cq Quartz or Avalon King from Amazon and save a bunch of cash, plus, you'll probably get a better job done than the car dealer will give you. Be sure and read up on the prep required. That's the longest part. Actually applying the ceramic coating is...

Not yet. I like the level stance right now, but will do rear spacers and bumpstops all around when I switch to 37" trail grapplers once the stock 35" BFG tires wear out.

Finally got around to measuring today. I measured 29.5" extended shock length on the rocksport shocks. They have a shim on one side at the top to hold them further from the frame. At static, full extension, shock body comes within 3/8"of the frame. So, there's a chance it could rub when actually...

Good point - I was mainly checking to make sure my brake/sensor lines were not stressed and springs were still seated. Never even thought to measure shock extension or for shock rubbing the frame. I'll check it this weekend.

Ok, y'all - I just got done rigging mine up my front like nyglt56 has done. I used the longer Mopar LCA's, 1.5" Terraflex front spacers, and MetalCloak RockSport extended travel shocks. The only thing I wasn't sure about was the swaybar links and I was able to find a pair of 12" links from a...

Ok, y'all - I just got done rigging mine up my front like ny.glt56 has done. I used the longer Mopar LCA's, 1.5" Terraflex front spacers, and MetalCloak RockSport extended travel shocks. The only thing I wasn't sure about was the swaybar links and I was able to find a pair of 12" links from a...

What spacer kit did you buy? I bought the Terraflex 1.5" front leveling kit and didn't get any links...

I'm going the same route as you with longer shocks, spacers and the longer Mopar front LCA's. My question is what did you do for longer front swaybar end links? I assume you changed yours for longer or disconnecting ones?

Maybe you Colorado folks can chime in - My wife and I both are recently retired and are wanting to move to Colorado to be closer to family (in Denver and Ft Collins). We currently live in a rural area of Kansas and really like the area between Lyons and Estes Park. It seems like more houses are...

Off topic, but maybe you Colorado folks can chime in - My wife and I both are recently retired and are wanting to move to Colorado to be closer to family (in Denver and Ft Collins). We currently live in a rural area of Kansas and really like the area between Lyons and Estes Park. It seems like...

I've had Viofo cameras in the past couple cars. My current one is the T130 I've had for 6 months. No problems, works good! Samples;

Pictures!

Hmmm.....I have a 2022 Rubicon with LEDs and that's the way it worked from the factory in the auto light setting. I did a quake led fender chop and they work the same way. The only thing that doesn't work is when the auto switches the headlights on at night, the fog lights turn off. Parking...

I just tried it and you are correct - Fogs stay on with high beams. Nothing changes with the auto light feature. Maybe take a rubber duck and cut a hole in the bottom to sit over the dash sensor? 🤷‍♂️:LOL:

Isn't this an option in the Tazer JL "fog light dropout" live menu selection? I changed it in my Tazer and I think it's working how you would like - I'll check later.

Stock Extreme Recon package (1.5" factory lift) with added 1.5" leveling spacers at front (for winch) and factory 35" BFG tires;