Search results

I was seeing if anyone has tried out these headers yet? They look like a decent set. Especially if you have them coated. https://americanracingheaders.com/products/392-jeep-wrangler-long-system?variant=43584077922520

Alright so after having my DSTRAC ultra 70 axles on for about 6 weeks and so far they’re awesome! I’ve only had one issue but was quickly resolved! So the issue was getting the rear speed sensors to pick up a signal. I had to remove the bushing that they installed and then moved the sensor as...

So I’m selling my Alcon brakes that I’ve had on my Dana 44’s before I upgraded to the DSTRAC ultra 70 axles. Brakes perform AMAZING and will stop 37’s with ease! I’m looking for $2200 plus shipping for all 4 calipers, rotors, pads, brackets and wheel spacers.

Okay so to start this off last year I installed a 392 HEMI in my jeep! Americas Most Wanted 4x4 did the swap in Holly Michigan and did an amazing job! Well I’m paying everything out of my own pocket and I couldn’t afford to do an axle swap at the same time. Well last month (May) I finally got a...

So as y’all know I have a 392 swap done by Americas Most Wanted 4x4. I was debating on stroking and boring it out to a 426 or even a 454. Everyone loves more power! I haven’t seen anyone talk about this option for their Jeeps yet. I figured I would get yalls opinion on it

OEM LED tail lights off a 2018 JLU. Light are in great condition. The mounting brackets are not included as they were used for my new lights. The brackets should be transferable from your existing tail lights. Lights do not include blind spot sensors either. I’m looking for $300+ shipping for them

So I’m going up to a DSTRAC ultra 70 axle and I have no use for these any more. Very little rock rash on one or two wheels because I had the HEMI installed last year. They’re basically new. Looking for $1200 for all 5 wheels. Specs are 17x8.5 with 5x5 bolt pattern. Item number is...

I was looking at getting axles since I did the 392 swap on my Jeep and I was looking at getting a set of Dynatrac or Currie axles. Each were only a couple of hundred apart so either one was a good choice. I went to the Rebel Off Road meet in Fort Worth and talked to Jacob (the manager) and he...

Okay so I need to get a feel on how many people are interested in my set up. It’s great for anyone who wants to run some 37’s! So I currently have a Ultimate Dana 44 front axle and OEM rubicon rear. Both have 5.13 gears installed and both axles have e-lockers. I have made my own wire harness’s...

I finally got the chance to clean out my garage! I’m selling my Superlift 2.5 lift kit with Fox shocks. It’s not the full kit and that’s why I’m looking to get $400 for it! It comes with front and rear springs, front and rear Fox shocks, and the front bump stops. I have the OEM lower control...

So I have the Rebel recon coil overs and the shop that helped tune them told me that the upper springs are too soft and needed to be changed out. Well I decided to go get my rig weighed up and found that she’s a HEAVY girl lol just in case anyone anyone is planing on doing a HEMI swap and coil...

I have a on board air compressor system that uses next venture motor sports compressor mount that is installed under the body of the Jeep. I loved having this on my rig but since I did the 392 swap it won’t fit anymore due to the larger exhaust system. It worked great for me when I was in the...

Story time! Alright so I had America’s Most Wanted 4x4 install a 392 HEMI in my Jeep. I drove it back from Holly Michigan to Dallas Texas (around 1200 miles) with no problems. I installed the Rebel recon coil over kit because I knew I needed a different suspension due to the extra weight of the...

Well I finally got some pics of my Jeep from America’s most wanted 4x4! I can’t wait to get it back and put the Rebel off road coil overs and rock Krawler long arms in!

So last August I went on a road trip and blow up my front diff. I decided to pick up an Ultimate Dana 44 to replace it with and grabbed a rubicon rear axle to have the lockers. Well I’m getting a 392 swap by America’s Most Wanted 4x4. I wanna know if I should put in some RCV shafts in the front...

No longer need it since I went to a different set up. Missing 2 nuts but can be found at a hardware store. Looking for $40 plus shipping

I have a pair of LED fog lights that came off my Sahara. Works great just decided to get a set of Baja designs. I had two stripped/seized bolts that were holding the lights to the bumper so I had to chop off them off so there’s a couple of scuffs on one light. No damage to the housing at all...

Okay so I’m planing to install a 5.7 HEMI and since I’m doing that I decided I’m going to get the Rebel off-road Recon coil over kit with custom springs for the extra weight. Well I said screw it and I’ll get a long arm kit while I’m at it! Rebel offers a teraflex long arm kit but I don’t...

Hey what’s up everyone! So I’ve been dealing with a bowing spring for the past 4 months and I can’t seem to figure out why the front passenger spring is bowing and making contact with the sway bar end link. I’m running the Ultimate Dana 44 front axle, Currie anti-rock sway bar, RPM steering...

So I just went to lunch this afternoon and noticed my headlights were on when it was sunny outside. The knob was set to auto and when I went to turn the knob to the off position nothing happened. The lights stayed on no matter what mode I was in. Has anyone had this issue? I’m thinking maybe a...