Search results

Looks sharp. I've had my XK Glow vent marker lights installed since July 2022. They function very well, improve turning and lane change safety, and have held up with no issues. I've received compliments on them too. To anyone considering, the multi-colour ones are more of a gimmick in my...

I ordered a "4xe" badge and want to use just the "e" affixed to the charging port indentation as it's a perfect size match. The badge letters have thin black adhesive foam on the backside however it won't stay affixed to the charging port door. For prep, I cleaned the plastic with isopropyl...

I like the mopar one but obviously it wouldn't work on granite crystal metallic paint due to the dark colour. I had @pixeldecals make this 2-tone one for me. The blue outline matches the outline on 'Rubicon' decal.

If you have paint work done, please post before and after pictures! Above is a picture of my Jeep just to show how easy it is to post! :like: I've been keeping up-to-date on this issue and have read all 174 pages in this thread. I have a 2021 Jeep Wrangler and am doing my best to care for it...

...still waiting on those photographs!

I have a granite crystal metallic 4xe and these are a closer match to the blue colour. The width of them also matches the full depth of each knob. I'm quite pleased. They're from Amazon.ca so try searching Amazon.com for similar. Voodonala Air Conditioner Headlight Switch Knobs Trim for 2018...

Love the white sidewall letters with the white retro wheels. The stance of your Jeep looks good. I used to frequent Mt. Baker regularly when I was younger on my snowboarding excursions (crossing the USA/Canada border used to be super easy and fast).

I intend to go with those tires & size once the stockers are worn. Great choice in wheels which compliment your grey Jeep. Looks sharp!

I installed these proactively. Had it shipped to a friend near Seattle on way to an Oregon trip this summer. I filed down one side on an angle for clearance (on both driver and passenger pieces) and they fit and work well.

I too painted the stock muffler while attached. See HERE and HERE. Makes it disappear.

I won't be convinced there's a gasket installed from the factory until someone separates the hinge from door and proves it.

I’ve read most threads and posts regarding bubbles in paint, corrosion and rust on JLs. This is what I’ve learned: - Doors and hinges are aluminum, bolts and nut plate inside door are steel; - Doors are painted at the factory with hinges already attached (I.e. there is no paint between them)...

I also installed these and posted HERE on July 11, 2022. I am quite happy with them. There is no light bleed. They sit flush to body but I did add extra 3M tape prior to mounting them. Followed instructions and watched a couple install videos. They have the 3 horizontal LED side strips as well...

Push tab in with a small flat screwdriver and pull apart connector.

I finished adding some decals. The vent and side stripe decals are two-tone to match the 'Rubicon' factory hood decal. I mocked it up on computer then reached out to Don @pixeldecals and he came through. I'm quite pleased with the end result and took a few glamour shots after detailing the Jeep...

I got front and rear Rokblokz in the normal size for my JLUR 4xe. I have stock tires and wheels and aftermarket side rail/step. I got them without the cutout. They look and function great. I got black on black. If/when you get 35" or larger tires, you'll probably want the XL size, so take that...

G2 has instructions in the package. Clean the area (they provide brake cleaner), scuff up a little with wire brush or sandpaper, clean again, tape off area (it’s applied with a brush so you don’t have to go nuts like you do with spray paint). Prep all 4 corners first because epoxy has 4-5...

Re-Painted my brake calipers using G2 epoxy custom colour match (G2 Custom Colours). G2 can match paint codes and I chose 'Surf Blue' which is the outline colour for trim and badges on my Jeep. G2's is a two-part epoxy that dries and hardens to a gloss finish. It bonds to metal and becomes...

Installed the Brawlee LED cargo light. Cut a small notch in base of factory wire cover on rear window and routed wires through it. Bundled wires together with factory ones as they pass from rear glass to roof. Routed wires through roof (used coat hanger) to the exit port where the the...

Would probably coordinate well with a Hydro Blue Pearl Wrangler.