Search results

  1. How durable is bed liner on plastic fenders?

    I still have my factory plastic fenders, and I like them, but dragging rocks and trees is starting to show some wear. How well will bed liner hold up when dragging branches or rocks? I expect that it will hold up to the random branch, but may not do well against rocks. Who has used Line-x...
  2. Dealer left oil cap off during an oil change and the Service Manager won't return calls.

    Besides taking a dealer off the list of places you would do business with in the future, what would you do if the dealer left the oil cap off after an oil change. The entire engine compartment is coated in oil and the under-hood insulation has a nice spot directly above the oil fill tube...
  3. Texas Mopar Performance Rock Rail with Step Assist

    Looking for a set of the Mopar Performance Rock Rail with Step Assist for a JL 4 door. Let me know what you have. I'm in Plano.
  4. TPMS Sensor Refresh Speed

    I have heard of people using their TPMS sensors when airing down. In my experience it can take a minute or two between updates of the pressure displayed on my screen. Is this normal? I have the engine off and ignition on and a deflator on a tire. It starts at 35. The next number I see is...
  5. Teraflex Tierod Rubbing Stock Wheels

    Is anyone running the Teraflex Tierod and stock wheels? I noticed the other day that both wheels will rub the tie rod at full turn.
  6. Warranty Coverage on Lifted Jeep and Wheeled

    I have a 2019 JLUR with 9K miles on it. I think my steering box is loose, and plan on taking to the dealer to check it out. Are they going to give me a hard time because it has been off-roaded and lifted? Here is what I have changed. 2.5 inch spacer lift under the stock springs Core 4x4...
  7. Factory Steering Stabilizer Orientation

    I seem to remember hearing that it was important to have the factory steering stabilizer oriented in the correct direction or it would not work properly. I just relocated it above the tie rod using the kit from Teraflex. When I did that, there is no way to have the side that originally faced...
  8. Camber heading towards out of spec.

    Just got back from Firestone. My front left camber is at -.6 degrees. A year ago it was at -.3 degrees. Spec is between -.8 degrees and .3 degrees. Is there something I should be looking at? Also my caster was at 6.6 degrees on both sides last year. I can't remember, but I might have...
  9. Fox ATS or Falcon Nexus stabilizer relocation

    I'd like to get either the Fox ATS or Falcon Nexus stabilizer but I want to mount it on top of the tie rod. They don't sell one for the JL but there are several part numbers for the JK. Can I buy one for the JK and use it with my stock 1 5/8 tie rod and a Synergy track bar / stabilizer stud...
  10. OEM style License Plate Light Connector

    I just installed an aftermarket bumper. I have a license plate mount with a light that just has two bare wires. I would like to extend it and use an OEM style connector so I can plug it straight into the factory harness. Does anyone know where I can get one? Is this same connector used...
  11. Longer shocks to go with my spacer lift

    I have the Rough Country 2.5 inch spacer lift on a JLUR with stock springs, and adjustable front lower control arms. I think I want to get shocks to match the lift so I can get rid of the extender brackets and get some more travel. Looking at the Fox IFP which should give me a little over 2...
  12. Help me pick a rear bumper

    I should have bought a new rear bumper right away, but I waited until I dropped on it and pushed it into the quarter. Luckily just damaged the paint on the quarter. Here are what I think are my must haves. Help me narrow it down. Sturdy. I know I'm going to drop off a ledge again and will...
  13. Fox ATS Steering stabilizer relocation.

    I've decided to get the Fox ATS steering stabilizer, but I know I'm going to drag it so I should do something to prevent that. On Summit's site it says... " . Also included is Fox's relocating hardware that moves the steering stabilizer up and out of the way, utilizing a new track bar...
  14. What tool to grease lower control arms?

    I'm getting ready to install a set of Core 4x4 LCAs. They came with both the standard and low profile type zerk fitings. I think it is probably best to install the low profile ones. If I do, I should be able to get to the front pretty easily. I think the rear would require drilling a hole...
  15. PARKSENSE UNAVAILABLE SERVICE REQUIRED

    After a minor relocation of my rear bumper with an Arkansas rock, I now get the following message. PARKSENSE UNAVAILABLE SERVICE REQUIRED I looked under the bumper and found where the wire looks like it has gotten pinched, then un-pinched after I pulled the bumper back. I think either a wire...
  16. Adjustable or Fixed Lower Control Arms?

    I Installed a 2.5 inch spacer lift last month and I'm happy with what I got for the price. I love the clearance that I got and the ride is acceptable. What I'm not happy with is the shaking that happens when I hit bumps. I only have 4K on my jeep so it does not devolve into death wobble...
  17. Rough Country 2.5 inch spacer lift on JLUR, Any Regrets?

    Who has this Rough Country 2.5 inch spacer lift on a Rubicon? Are you happy with ,it? How long have you had it? Would you do it again? I'm mostly stock right now. The front has been lowered slightly from a bumper and winch. It is a daily driver with occasional off-roading, so I need to...
  18. Texas JLUR OEM Rock Sliders

    Just pulled these off a new JL Rubicon this weekend. like new. No scratches or dings. All hardware included. $100. Located in Plano
  19. JL (2DR) OEM Front Steel Bumper with LEDs, Skid Plate and Top Filler Panel

    I just pulled this bumper off of my new Rubicon. It comes with all nuts, bolts and fasteners. It has LED fog lights and comes with the Skid Plate, and the Top Filler Panel. I'd prefer local pickup, but we can work out shipping if needed. $900 Everything is in new condition with no scratches.
  20. Installed XRC front bumper. Steel bumper LED's don't fit

    I just installed a Smittybilt XRC Gen 2 bumper. There is no way for the LED's from my steel bumper to work in the XRC. Any ideas? Anyone have a set of LEDs from a plastic bumper with the wiring harness that they would like to sell?
Top