Search results

  1. 392 Transfer case failing me

    Stock 392 with stock Tcase. Running 4.88’s & 37”s with tazer. Bought with 5,000 miles on it, 11,000 now. I’ve been driving in 2wd mode since I bought it, and previous owner likely was too, since it was that way on the dealer’s lot. Communicated with Scott Blum & Joe from Zauto on FB and they...
  2. Oregon Off Road Only York air compressor kit for 3.6l

    Off Road Only York air compressor kit for on board air. If you know anything about York compressors, you know this thing pumps out serious air. Way faster than even a dual ARB compressor. Bolts to front of 3.6 motor. All parts and instructions included. The kit is for a JL 3.6, but instructions...
  3. Oregon Off Road Only York air compressor kit for 3.6l

    Off Road Only York air compressor kit for on board air. If you know anything about York compressors, you know this thing pumps out serious air. Way faster than even a dual ARB compressor. Bolts to front of 3.6 motor. All parts and instructions included. The kit is for a JL 3.6, but instructions...
  4. Damage to transfer case by using 2wd?

    I commented on Casey Currie’s Instagram post about his new 392 axles asking if they were available with selectable hubs. He stated that it’s “super hard on the Tcase to run it in 2wd.” I’ve been running mine that way for 2,000 since I bought it (except while wheeling). Anyone know more about this?
  5. Switch-Pros under hood mounting

    Anyone mounted one on the 392 yet? I took the mount out of my 3.6 JL, but it’s not going to work with the battery location changed. I’m wondering if this diesel mount would clear the hood, etc??? I emailed SDHQ, but haven’t heard back yet, and not holding my breath that they’ve seen a 392…
  6. Parts differences on 392??

    Is there a list of all the differences? I have the opportunity to buy a used one at my local dealer and he’s actually willing to let me keep my trade in for a day to swap “bumpers and wheels/tires”. But I’m wondering if my Tom Woods shafts will swap over, etc? Factory upgraded steel steering box...
  7. Change directions or start over?

    I have a decently built 19 JLUR on 37”s. (Ultimate 44 front, trussed and chromo’d rear, beadlocks, 3.5” lift, King remote reservoirs and hydro bumps all around, hydro assist, etc.) I’m pondering 40”s or even 42”s, but that’s a completely different build, and I’d go double triangulated rear, etc…...
  8. ORO York Air Compressor install

    After trying to make my ARB twin compressor work under the hood of my JL for the last year, I finally threw in the towel. I had a mount I found on here that @Kansascoast or someone had designed for under the master cylinder. The same location as the DV8 & now Grimm uses. I had fashioned my own...
  9. EVO lift / King Shock issue (with a fix)

    I recently installed an EVO 3.5” Stage 2 Overland lift with King 2.5 shocks with remote reservoirs, and both front and rear EVO track bars. Also ended up adding EVO front UCAs to dial in castor better. The issue was with full articulation, the shocks would hit the frame, like super early into...
  10. Best way to “limit” dust with top and doors off?

    Obviously it’s going to get dirty. But has anyone experimented with ways to keep dust down? We spent 10 hours on the McGrew Trail Saturday (amazing by the way) and my Jeep is trashed similar to 3 days on the Rubicon. My friend also had his doors off, but the full hardtop was on. His interior...
  11. Tazer JL v11.1.7

    I have the newest version (just updated from v4). Haven’t tried any of the updated features, but have noticed now that when I start the Jeep, I have to select the audio source almost every time. It doesn’t default to the last setting like it should. Not a deal breaker, but certainly annoying...
  12. Don’t use passenger side grommet to get wires through firewall!

    I used the grommet based on some threads I found here. Now at least 1 of my AUX switches doesn’t work anymore. After wiring in my Search & Rescue radio, I lost my lights wired to the AUX 2 switch. I decided to stick my camera scope inside the grommet to take a peak. I assumed that the factory...
  13. Where are you hosting your pictures?

    Ever since photobucket went to crap, I haven’t bothered to post pics on forums. It’ probably time to do that again. Where are y’all uploading your pics to be able to post them? Thanks!
  14. Where can I find the Mcase+ slotted fuses?

    The new slotted cartridge fuses are very hard to find. Local parts stores don’t have anything, Google isn’t much help, and the only thing I find on Amazon is a huge package that I don’t want to spend $40 on (Especially when I’ve never heard of this brand. I’d gladly buy this set if it was...
  15. Sold: WTB JL rubber dash insert

    Need a rubber dash tray insert. Cut mine too short for the 67 Designs mount.
  16. Oregon Sold: ISO JL dash tray rubber insert

    I cut my insert too short for a 67 Designs phone mount. Does anyone have a whole rubber insert piece that they removed for another mount? I’d love to buy one! Thanks!
Top