This is what I did with my old JK and it was basically about as quiet as stock. I plan on doing the same with my JL eventually. This is just a Magnaflow Muffler installed after a Vibrant Resonator. I don't have any pics, but I did put a turn down tip so the exhaust wasn't pointed at the rear...
Has anyone checked to see if standard offset chevy TREs fit in the knuckles of the JL?
I ran an aluminum tie rod on the JK with these and they worked great and held up well.
They are also common an inexpensive
The rest of the on mopar tailgate/ body torque specs:
Spare tire carrier 13 ft lbs
Tailgate side hinge 35 ft lbs
Body side hinge 21ft lbs
Wheel on carrier 59 ft lbs
Evos torque specs probably only apply to tire adjusting brackets
I received mine yesterday and haven't installed yet. I was pretty disappointed in the packaging. The carrier was sitting loosely in the box and the additional parts were wrapped in one layer of paper (also unsecured) so there are a bunch of scratches and chips in the powder coat from...
Not too difficult. It took about 3 or 4 hours. Get a fishing wire from home depot if you dont already have one (electrical dept). It will make things easier.
Take the red cap off the harness and use a bent bobby pin to pop out the orange wire.
These tips will make sense once you get into the...
So I just installed the aux switches and enabled them with my tuner. The aux switches menu is showing up in the settings tab, but the switaches themselves aren't working.
Does the jeep need to go through some cycling before the switches start working? I've got something connected on the 1st and...