Search results

  1. Rear Bumper Integrated LED Reverse Lights

    I have the metal rear bumper. Is the process to remove that the same as it is for the plastic version? I can't find an online video that's specific to the removal of the metal one.
  2. JLUR-Lower Front End

    Yes, I added 1” spacers to the coils which corrected the issue.
  3. JLUR-Lower Front End

    The winch and Blue Ox base plate figment was fine. A slight modification (grinding) to the OEM skid plate was necessary to get it back in the proper location.
  4. ESS quit working

    I had to scroll to the proper screen. It said battery charging. Took the vehicle to the dealer today. They tested both batteries and found that the main one was bad. Small ESS battery tested fine. Replaced the main battery under warranty and all is well again.
  5. ESS quit working

    The ESS (electric start stop) system stopped working on my JLUR today. There are no warning displays and voltage is normal. Does anyone know what might be the cause of this?
  6. JLUR-Lower Front End

    Thanks! It doesn't look like Teraflex makes 1 inch version of these, so is there any issue with stacking two of these on each side?
  7. JLUR-Lower Front End

    I installed a factory WARN winch and Blue Ox tow bar on my 2018 JLUR and have noticed that the front end now sits about 1" lower than the rear of the vehicle. The Jeep still has the original factory suspension, wheels and tires. What's the easiest way to restore the front height and "level out"...
  8. JLUR-Lower Front End

    I installed a factory WARN winch and Blue Ox tow bar on my 2018 JLUR and have noticed that the front end now sits about 1" lower than the rear of the vehicle. The Jeep still has the original factory suspension, wheels and tires. What's the easiest way to restore the front height and "level out"...
  9. Freedom Panel Noise

    Not sure if the fabric tape helped because there's still a faint ticking sound coming from the same location every so often. Overall, the panels are much quieter now though.
  10. Freedom Panel Noise

    Yes, the Velcro does seem to have worked. The trick is to make sure that it's applied to the leading outside edge of the metal mount for the panel. I also think that the panel's plastic locating pin that inserts into this mount contributes to the noise by rubbing against the plastic coated...
  11. Freedom Panel Noise

    Ok, thanks. I've attached the Velcro as shown. We'll see if this works!
  12. Freedom Panel Noise

    Thanks. I checked, but those bolts are tight.
  13. Freedom Panel Noise

    I absolutely love my 2018 JLUR, but both Freedom Panels make a ticking noise that is driving me crazy! The sound comes from the area of the panel locking lever directly above the driver's and passengers head. The noise comes and goes based on road surface and ambient temperature. Unlocking the...
  14. Freedom Panel Noise

    I'm certain that's not the cause. Pushing up or pulling on the lever when there's ticking makes it quieter.
  15. Freedom Panel Noise

    I absolutely love my 2018 JLUR, but both Freedom Panels make a ticking noise that is driving me crazy! The sound comes from the area of the panel locking lever directly above the driver's and passengers head. The noise comes and goes based on road surface and ambient temperature. Unlocking the...
  16. Creaking sound from driver side pillar

    No, the sound is definitely coming from above the driver and passenger heads near where the Freedom panel lever is.
  17. Creaking sound from driver side pillar

    Damn! I’ve already torqued them to spec and also tried tightening them all the way. None of that has help and the annoying driver and passenger side creaks persist. Anyone have any suggestions?
  18. Creaking sound from driver side pillar

    I have a JLUR with the Freedom panels/hardtop and have the same creaking problem on both the driver and passenger side. Will installing the bolts solve my problem, or does my hardtop already have them?
  19. Flat Towing with Installed Winch

    That looks good. How soon before you connect with the RV? Very interested to hear how it works.
  20. Flat Towing with Installed Winch

    That's good to know. Thanks. I plan on installing the winch way before I get around to purchasing the flat tow baseplate. Can the winch remain in place when the flat tow baseplate is installed?
Advertisement
Top