Search results

  1. Rhino Rack Backbone / Pioneer Rack Issue (Help Please)

    Can you confirm the part number of your platform? I haven't installed mine yet, as I am still waiting for the backbone to arrive. However, I bought the platform used from a guy that had the platform installed on the JKU. The first gen platform was made for the JKU, and when I bought it, he...
  2. Which Butyl Mastic for rack?

    not the foam, but the rubber eletrical tape. https://www.amazon.com/3M-Scotch-Se...&keywords=butyl+rubber&qid=1594903946&sr=8-14
  3. Which Butyl Mastic for rack?

    I also contacted Rhino for recommendations on the replcaement for BUTYL MASTIC. I was planning to use the RIGHT STUFF sealant to make a ring and some in the hole. And apply the tape around the caster's back, making a seal around it. Has annyone tried that?
  4. Auxiliary (AUX) Switches Configuration/Installation DIY

    Not sure if this question was asked here. I have my radio connected to IGNITION HOT in the cabin Aux Cable. Planning to connect some small lights on my roof rack sides, the on off button is already on the rack from a previous car and all wired up. Just need the pods installed. Wondering if I...
  5. JLU BR Sasquatch Build

    They why I want to add a locker is very good question and I ask myself the same thing. Truth is, as you mentioned, for my application, I really don't need a locker. However, I do know that Jeep LSD clutch will eventually fail. If that happens under warranty, then ill have a new one installed...
  6. JLU BR Sasquatch Build

    Install - On Board Air - ARB Single Compressor Under the Passenger Seat The first more expensive upgrade I made to my Sasquatch Jeep was the install of the onboard air system. After pondering which compressor to install, I finally made up my mind after checking out two Jeeps airing up at the...
  7. JLU BR Sasquatch Build

    On the same week we got Sasquatch, we took it for a scenic drive up to a "secret lake" in BC. Nothing crazy on the trail, had lots of fun, was a nice hike and a fantastic view! Here are some pictures of the trip. Next up, will be the ARB Compressor to be installed under the seat! Cant...
  8. JLU BR Sasquatch Build

    The first "upgrades" really soft ones! Stubby antenna replacing the horrible OEM antenna. Sasquatch Sticker applied to both sides of the hod Canadian flag sticker to both sides above Jeep logo (was going with a Brazilian flag on one side, Canadian on the other, but heck, I'll leave my...
  9. JLU "Poseidon" Build

    Sweet! Poseidon was going to be the name of my JL, but for a while, my buddies call me Brazilian Sasquatch, so just made sense! lol!
  10. JLU BR Sasquatch Build

    I have ordered this week! After some research, I opted for the Westin for their affordability, no drill and mount to frame install. The install will be this or next week, just depends on how stuff flows here at the shop I work...
  11. JLU BR Sasquatch Build

    After spending some time reading the other builds I decided to add mine here too! On the 29th of July, after long 4 months of waiting... I finally got her! Although it will be my daily drive, It will be slowly upgraded to a competent family offroader/overlander. I have no intentions of rock...
  12. Quick Help please, do I have LSD?

    I'm kind of in the same boat here... My build sheet and sticker confirm I have LSD... picture from the rear pumpkin says its a Dana44... Build sheet also says it has michelin tires and all season tires... instead of the AT... Then yesterday I had the opportunity to lift it up, spin...
  13. Canadian Ordering Experiences

    Time Line so far April 8th - Confirmed Order with factory April 21st - Confirmed D Status from Dealer May 8th - VIN is now confirmed! June 1st - Dealer contacted informing vehicle was being built June 14th - Vehicle currently at JB Status - Shipped to Body Vendor June 29th - Dealer contacted me...
  14. Replacing current LSD with Air Lockers

    Yeah, I kinda knew about the LSD failing right close to the warranty termination. My Jeep Piggy Bank has a special area for the air lockers since I planned my build. It just came across recently that because of the LSD, it might not be compatible with the air lockers! So good to hear it is!
  15. Replacing current LSD with Air Lockers

    Hey Guys, Tried searching for the answer could not find it... I ordered a JLU Sport S with LSD to have the Dana 44s on the rear. Also, with the intention to once, the warranty is over, have air lockers installed in the rear. The question is... With the LSD on the rear axle... is it still...
  16. Roll Call Canadians

    I'm from Brazil - Living in BC for the past 5 years. Waiting to take delivery of my JLUSs - V6 in Sting Grey
  17. The Non-Rubicon Jl & JLU Thread

    Loved this thread! lol! Last year when i decided that I would buy a Jeep, started digging in... 1st thing, I could not afford a Rubicon. So crossed it out. Started looking at Saharas as my wife insisted on the interior with leather, and her idea of it being a superior veh than the Sport S. So...
  18. Canadian Ordering Experiences

    Hey Guys, Yesterday I got the CryptoSticker notification that my car had an update. Looked into it and window sticker was available! Time Line so far April 8th - Confirmed Order with factory April 21st - Confirmed D Status from Dealer May 8th - VIN is now confirmed! June 1st - Dealer contacted...
  19. Canadian Ordering Experiences

    I believe the sequential is after the W. that’s the serial number of the vin. My prefix is the same as yours. Except, where you have a 5 I have a 7. That is theposition of the “validation” test for vins. Something like to test the vin and make sure it will not be repeated.
  20. Canadian Ordering Experiences

    Hey guys, Trying to figure out if there is any order on the vins that are being delivered today’s vs our own vins. Noticed that the Jeeps that are set to be delivered on some of theBC dealershave the lastfour of the vin being 2030 to 2090 or so. The ones Ifound had same engine and tranny code...
Advertisement
Top