Search results

  1. Which fill plug on Dana 44 advanctec covers

    Here is what Dana says: Hello Ted, Thank you for you question. The upper hole is used for the initial fill after a service/repair or new axle install. This allows for enough fluid to properly fill a small reservoir used to properly lubricate the pinion gear bearings. The lower hole is used...
  2. Which fill plug on Dana 44 advanctec covers

    2 qts in the rear still nothing come out . Which plug should I use for the rear and front?
  3. *Caution* Dana Spicer Advantek 44 Diff Covers

    I have these also on my Jl. My question is how much oil and what plug to fill up to front and back
  4. Torque Values For Jeep JL Wrangler

    Are the numbers the same for the M200 & M220 axle?
  5. California HELP! Need Your GMRS Antenna Mounting Recommendations for '21 JLU

    I like this location and was thinking about do the same thing. Ended up going under the glove box with Velcro.
  6. What did you do TO your Jeep JL today?

    Finally got radio installed. Used the Topsy antenna and mic mounts. Used Velcro to mount the radio under the glove box.
  7. California HELP! Need Your GMRS Antenna Mounting Recommendations for '21 JLU

    I also used the Topsy antenna and Mic mount. Used Velcro under the glove box to mount the radio.
  8. Steering vibration between 50 and 60 mph

    28 is what i like the 40 did not work much except making the ride harder. What tires are you running? I have the Nitto TrailGrappler.
  9. Steering vibration between 50 and 60 mph

    The pulsing is what I have. I too am thinking its the tires . Have been playing with air pressure up to 40 right now. Will be rotating the tires to see if I have a bad one. Overall it seems to be much less but still not sure. When I chalk test them 29-30 is the sweet spot. I have a Clayton 2.5...
  10. Steering vibration between 50 and 60 mph

    Any updates on your fix for this? I just put in D44 and 37 and now have the same problem with a drowning noise above 60.
  11. PICS! Before and After Lift Pics!

    No name as of yet. How about Alticon?
  12. What did you do TO your Jeep JL today?

    Who are the fenders from been waiting for the mopar ones since Feb.
  13. 35" and 37" JL pics with lift kit

    Thanks they are the Rock Slide engineering with the fold down step. They do seem to be pretty strong and sure help getting in and out.
  14. PICS! Before and After Lift Pics!

    First is stock, second is with @claytonoffroad 2.5 overland lift with 37s.
  15. What did you do TO your Jeep JL today?

    Finally got my spare tire and wheel put in the RCV axles shafts
  16. 35" and 37" JL pics with lift kit

    Here is mine with the @Clayton off-road 2.5 overland lift and 37s
  17. 2.5 Overland plus on my 20 Altitude

    Thanks, Drives good too. Now have put on 37s.
Advertisement
Top