Search results

  1. JL Window Sticker and Build Sheet Order Tracking

    Just curious for those oy waiting on High Altitudes. Are you now getting a 2020 or a 2021 at same price? Seems to me that model in particular had the most changes/differences to already existing or even new Saharas and variants: Interior (seats, stitching), painter exterior bits (mirror...
  2. I don't get the Sahara

    Well if you're an older guy, like me, we could talk Yenko COPO 427 Camaro circa 1969.
  3. I don't get the Sahara

    I wonder what a sticker delete option would go for? That's right - charge for doing less. One thing I LIKE about the Sahara Altitude is that it has virtually no stickers. Rubicon hood sticker delete anyone?
  4. Rubicon vs sport suspension height?

    Nuthin like pullin up to the ole tire store and sayin "fill them up" (the wheel wells that is).
  5. Bike Rack Lighting

    Want to use the towing package (and full factory LED package) 4 pin connector to add a light bar of some sort to a bike rack. Does that light bar - or separate lights for that matter - have to be LED or can it be incandescent (1157)? Thanks, Pete
  6. JL Sports S, 35 inch tires, no lift

    Higher lift fenders help out on articulation clearance but not on suspension clearance like lock-to-lock steering interference. Wheel spacers or properly back spaced wheels for that.
  7. Rubicon vs sport suspension height?

    Looks Great. I assume the Fully Monty Rubicon treatment including shocks? How much lift did you get?
  8. JL Window Sticker and Build Sheet Order Tracking

    Stick with it. We’re all counting on you:
  9. Rear wheel spacers needed?

    Just a swag from me, but spacers are generally used to address clearance and/or looks - and I assume more for looks and matching the front. I have never heard of adding spacers to address clearance issues in the rear assuming, that with 12.5" width 37", you have reasonable BS/offset...
  10. Wheel Spacers for JL

    As you probably know, as long as you are using stock wheels then how much of the stock stud that can protrude is based on how deep the pocket is in your stock wheel. And no touchies at all. I assume the stock stud length is the same on all JL models at 1.67 inch or 42.5mm...
  11. Wheel Spacers for JL

    Bora is a quality spacer and they have a 1” for the JL in addition to 1.25, 1.50, and 1.75 http://www.motorsport-tech.com/bora.html I had emailed them and they were uncertain if the 1” would would fit the stock JL wheel reliefs. The 1.25 spacers do work with the stock wheel reliefs.
  12. Police chase ends after pit maneuver

    Yeah, this is South East Florida one of several nut job hot spots in the state. This guy is also being looked at as a potential suspect in a dual homicide on Ft. Lauderdale Beach the night before. Maybe, maybe not.
  13. Rubicon bumper on sport install?

    Take a look at this thread re: Rubicon rear steel on a Sahara with stock flares especially posts 13, 22, and 45: https://www.jlwranglerforums.com/forum/threads/rubicon-rear-steel-bumper-on-sahara.18712/ Re: perhaps needing other parts to make it work, you might also ping Benny at...
  14. Rubicon bumper on sport install?

    My hunch is that it will not line up with the stock rear fender flares, but there may be hope. Stay with me for a paragraph or more. Corrections welcome. I was under the impression That there were two types of rear bumpers. One piece plastic which you find on the Sport, Sport S and derivatives...
  15. Rubicon rear steel bumper on Sahara

    For the creative geniuses in this thread do you think it's possible (and how) to affix these Rubicon end-cap parts to a stock Sahara rear bumper to align with Rubi fender flares? https://www.quadratec.com/p/mopar/rear-bumper-end-cap-wrangler-jl-rubicon-plastic-bumper Thanks, Pete
  16. FIRECRACKER RED Wrangler JL Club

    I have two grand daughters - 4 and 6. The 6 year old insists on a RED Jeep. The 4 year old would prefer Purple or, uhh, Pink. Gonna be hard to make them both happy.
  17. How Can We Help?

    Hi Benny, Appreciate your thoughts on this, but since I won’t likely have the Willys “Edition” for 6 months or so (likely a 2021) don’t want to run you around. For those, like me, who want to put Rubi flares on a Willys what are the MOPAR replacement options for the rear bumper assuming rear...
  18. Impulse buy for 35's

    You need the liners. Your rear bumper will not align with the Rubi flares, but it will fit. You will also need the plastics rivets and tool to mate The liners to the fender. Probably will need some white body clips. And maybe some band aids.
  19. 2021 Jeep Wrangler Unlimited JLU (4-Door) ORDER GUIDE!

    Looks like the Willys "Edition" picks up Selec-Trac. And the only place a potential Islander SportS model shows up:
  20. Ready or not... 2020 High Altitude JL / JLU build & price is here

    I probably missed this in the posted 2020 order guide where the High Altitude debuted, but in the 2021 order guide just posted order code DME is 3.73 gearing as part of the HA package including the wider front and rear axles as mentioned above. Still no Snazzberr. And the interior stitching is...
Top