Search results

  1. Locker Position Sensor Potting - DANA 44

    I did this but with my lift and the amount of downward droop I have it was still pulling on the harness
  2. Locker Position Sensor Potting - DANA 44

    I did the pot on both my axles after they were replaced and also installed the z locker on both axles as it gives me more room for the axel to droop and not pull on the harness.
  3. Locker Position Sensor Potting - DANA 44

    Ended up the sensors were not bad it was the rear harness after they changed both axles front harness and controller then the tried the rear harness after they dropped the tank and it worked
  4. Locker Position Sensor Potting - DANA 44

    About 50 miles as they just replaced both axles on my jeep and didnt want them to fail again
  5. Locker Position Sensor Potting - DANA 44

    Mine are drying as we speak
  6. Locker Position Sensor Potting - DANA 44

    just got new front and rear axles on my jeep last week and took it apart this weekend to pot the new sensors before I have trouble again. great write up on instructions!
  7. “Service Axle Locker System” Light On

    finally fixed after 14 weeks in the shop! replaced front and rear axle, front and rear wire harness, controller and module.
  8. “Service Axle Locker System” Light On

    Yes both axles front wire harness and controller and still have the same symptoms
  9. “Service Axle Locker System” Light On

    newest update: dealer called and said jeep is ready to pickup (11 weeks at dealer) get there and check underneath and have new front and rear axles (due to time at dealer I was given a star case and they also sent out a engineer from FCA to look at jeep. while at dealer I check lockers and they...
  10. “Service Axle Locker System” Light On

    My 2018 JLUR has been in the shop for 9 weeks and they have replaced the front axle, wire harness and controller. I was given a star case and even had a engineer from FCA went to the dealer and now the suspect it is the rear axle (backordered) I also did try the Z-locker fix and that didn't work...
  11. Rear Axle Replace on Rubicon for Flashing Locker Light

    My 2018 JLUR has been in the shop for 9 weeks and they have replaced the front axle, wire harness and controller. I was given a star case and even had a engineer from FCA went to the dealer and now the suspect it is the rear axle (backordered) I also did try the Z-locker fix and that didn't work...
  12. So you have a Service Axle Locker warning light. How I fixed mine.

    My 18 JLUR has been in the shop for a month now and they just figured out they will now replace the axle. I had tried the Z locker plugs but they did not work on mine...
  13. THE FIX FOR LOCKERS: Blinking lights, service axle locker system, lockers wont engage/disengage

    also when I look at the off road pages it shows front and rear locker are locked and they are not locked.
  14. THE FIX FOR LOCKERS: Blinking lights, service axle locker system, lockers wont engage/disengage

    mine also did not resolve the locker problem? did but two z-locker plugs tried rear only and both front and read taser married and unmarried also reset system by unplugging both batteries to reset system? I did notice some oil in the rear plug when I removed the stock plug but did clean out both...
  15. THE FIX FOR LOCKERS: Blinking lights, service axle locker system, lockers wont engage/disengage

    I had ordered two but if I only need one (will try rear only first) I will keep the spare one for any friends that have trouble on the trail.
  16. THE FIX FOR LOCKERS: Blinking lights, service axle locker system, lockers wont engage/disengage

    just ordered two for my JL as I have the locker problem and will let you know if this fixes the problem
  17. Impact wrench / driver recommendation?

    I have the Milwaukee 2863-20 1/2" impact driver, may be overkill but I know I will be able to remove any bolt
  18. Outback Adventures TRAILGATER tailgate table

    Thank you! this helps. stay safe!



Advertisement
Top