25% off Cascadia 4x4 LED integrated hawse fairlead!
Hey All! For Black Friday - Cyber Monday we are offering our LED integrate hawse fairlead for 25% off + free shipping!
Also keep in mind we offer 15% off the rest of our winch accessories for JL Forum members using the code in our signature. Let me know if you have any questions...
Thanks for the feedback @JimLee ! Glad to hear everything is working well for you :)
@Hayseed_JLUR We have these systems in use in some of the hottest parts of the world (Australia, Middle East and AZ, NV etc) and there have been no reports of any negative effects caused by heat build up.
Great question! The cutouts are surrounded by foam weather stripping to help keep debris out. There is also an additional piece of weather stripping lower down on the panel to prevent contact with the vehicle hood.
We do recommend adding the optional vehicle vinyl as an extra layer of...
Fair concern, however we have been testing these for the past couple years in Canadian winters and ice buildup has never been an issue on the JL panels! :like: If anything were to freeze in there it would melt off with the heat of the engine. But like I said we've had many panels survive the...
Great to hear the positive review!
Unfortunately we were very limited in our design due to the complexity of the Rubicon hood. We got the most out of it that we could!
We have certainly thought about a fender add on. This is something we might continue looking at in the future. :like:
You are correct, the output will vary due to light conditions. However, we regularly see peak output with all of our VSS panels, sometimes even above factory specs. We use some of the most efficient solar cells out there in order to maximize the panels output even in low light conditions. With a...
As @beaups mentioned above you could charge accessories such as tablets, phones and computers.
An average overland fridge/freezer draws between 1-2 amps. The 30 watt panel will provide ~1.7amps in peak conditions. :like:
No problem! It must the the angle of the photo making it hard to judge the exact specs of the panel. :)
Rest assured that there is no chance of these coming up once they are installed. We've had them out in the wild worldwide for the past 2 years with no issues.
It may just be the angle of that picture but the panel is adhered solidly right around the edges. The panel is only about 4mm thick, there is no need to bevel it. We use a strip of 3M VHB around the perimeter of the panel. I guarantee there is NO way this will fly up and turn into a kite. We are...
The long awaited Vehicle Specific Solar (VSS) System for the JL/JT Rubicon's is now available for pre-order! These kits will be shipping in September.
We've done our best to maximize the available space on the Rubicon hood and have managed to get 30 watts out of the limited space available...
@JimLee We recommend just washing the panel as you would the rest of the vehicle (soap and water).
Thanks for all the tip's regarding using weights to help cure the tape in place. This is something we will certainly be including in future instructions.
Keen Eye! Yes there is no longer a white logo on the panels. Instead our logo is molded into the junction box at the top of the panel. :rock:
We don't offer a wiring extension kit, but this is something that could be done yourself if you are comfortable with splicing wires.