Search results

  1. ROCK HARD 4X4 Front Control arm skids.

    I have torqued mine to 190 several times already also. Haven’t had any issues.
  2. Issue w/ Metalcloak Tie Rod & Stabilizer Kit for JL

    What is your toe set at? That will change how far the tire will turn in when it hits the steering stops. 1/16 in is a where you want it.
  3. BUMP Steer

    Who was the source for this answer?
  4. Stabilizer setting and shimmying

    I probably wouldn’t have even moved it but we just booked a house in Buena Vista Colorado in September. A few of the trails I am looking at look to be pretty rocky and it’s just going to be me and my wife. I pretty much in vision her spotting me right in to the stabilizer hanging down under the...
  5. Stabilizer setting and shimmying

    Truer words were probably never spoken! Lmao! 😂
  6. Stabilizer setting and shimmying

    Pretty much my exact experience
  7. Stabilizer setting and shimmying

    It’s just weird how it went so far out of whack. It literally was 10 times worse than what I was fighting before. Then I turned it back down and it was fine.
  8. Stabilizer setting and shimmying

    Actually it’s just the angle of the picture. The two are actually dead even.
  9. Stabilizer setting and shimmying

    I would be interested to see if you turned that up to 15-16 if you got any kind of wobble. Inquiring minds want to know! 😎
  10. Stabilizer setting and shimmying

    I’m at 6.8-6.9 and I was at 15 clicks when it started acting funky. We talked about this before a little bit, I’m wondering if the stabilizer and the caster are fighting each other trying to center the wheels at some point.
  11. Stabilizer setting and shimmying

    So the bracket brings it up about 1/4” but it it pretty much perfectly level with the tie rod.
  12. Stabilizer setting and shimmying

    Prior to today it was driving great. Honestly if I didn’t have it already I probably wouldn’t bother with it.
  13. Stabilizer setting and shimmying

    Trust me I forgot what a lot of stuff looked like stock on this thing! LOL!
  14. Stabilizer setting and shimmying

    I have the steer smart bracket and a tie rod clamp. So basically the same position as yours.
  15. Stabilizer setting and shimmying

    Where is yours located? Stock location or raised? In the stock location I had it maxed at one point. Wheel return sucked, where I have had it it was as stiff as I could get it and keep good wheel return.
  16. Stabilizer setting and shimmying

    Is yours in the stock location? I had mine turned up quite a bit in the stock location and never had an issue either.
  17. Stabilizer setting and shimmying

    So after a few months now with the Jeep driving good I finally decided to install the relocation stuff I had sitting around for the Fox ATS stabilizer. I used the Steer smarts bracket on the axel and a 1.75 tie rod clamp from TMR customs. I installed everything and took it for a ride, not really...
  18. PVT PARTS (2 door Sarge Green Rubicon build)

    How long ago did you place the order for it?
  19. PVT PARTS (2 door Sarge Green Rubicon build)

    How long did it take to get the carrier?



Advertisement
Top