Search results

  1. JLUR battery flatlining when flat towing

    JimN, I think you are spot-on in isolating what the problem is. The JL's enter a sleep-state about 3 minutes after the last door is closed. As mentioned previously, you can easily validate this by closing the driver's door and leaving the window down. After ~3 minutes you can stick a broom...
  2. GMRS antenna mount

    Yeah, we have the front-mount option in stock and ships the same day as ordered. It is available by clinking this link HERE. We also have an all-in-one package with the mount, antenna, coax, remote mount cable, and the MXT275 radio for a pretty good savings. This all-in-one kit is available HERE.
  3. CB Antenna Mount Needed!

    We've had our CB antenna mount out for the JL for almost 2 years and it works for the OEM tailgate and for those using the MOPAR tailgate reinforcement kit. I'm sorry ours doesn't appear to work with the Rugged Ridge reinforcement. Also, we recently introduced a stainless steel front-mount...
  4. GMRS antenna mount

    No, having the antenna close together will not impact their performance.
  5. GMRS antenna mount

    Sorry for any confusion....
  6. GMRS antenna mount

    Refer to my Post 61. One pic is using the forward cowl location and the other picture is using the cowl location nearer the a-pillar.
  7. GMRS antenna mount

    We provide a lot of flexibility with our front-mount GMRS/HAM/CB antenna mount. You can choose to mount it more forward - or closer to the a-pillar and on either side of the Jeep for a total of 4 locations. Absolutely no drilling for any of the locations and the mount will not contact your...
  8. GMRS antenna mount

    I think the consensus is that the more you can keep a front mount out of your line of sight, the better (aesthetically). Smack in the middle of the hood would be the best for performance (somewhat symmetrical ground plane.) Our front cowl mount lets you choose 1 of 4 places - 2 on each side...
  9. Best Setup for RV Flat Tow

    Yes, the rear outlet is configurable as noted above. For those that want to make the front outlet always hot, we have an easily installed kit for that HERE.
  10. GMRS antenna mount

    Hi, this forum is the only place we advertise and I suppose our only exposure beside word of mouth, We are often asked about "forum prices" - but all of our prices are forum prices... this is our audience!
  11. Midland MicroMobile 15w GMRS Install

    Looks great Voodoobones. For others considering our Mic Mount with the Midland GMRS mic clip, I'd recommend using 3M Double-sided tape. Just make sure both surfaces are clean and use about 1" of this stuff and the mic clip will never come off. (The traditional metal CB mic clips don't have...
  12. Midland MicroMobile 15w GMRS Install

    Wait! We have to READ??? (Thanks for pointing that out. In my defense, the out of the box default seems to be through the handset speaker - at least that's what happened when I hooked up a new one to see what was up. Cool that you can change it, if desired.)
  13. Midland MicroMobile 15w GMRS Install

    The new Midland 3db Ghost antenna does fit on both our rear GMRS bracket and our new front-mount bracket.
  14. Midland MicroMobile 15w GMRS Install

    LOL - well, we do sell an all-in-one kit that include the MXT275, the Midland Coax, our (rear) mount, and the Mic-holder! We're going to expand this so that folks can choose our front-mount antenna option. May take you up on using your pictures! A Mic Mount coming your way just for making the...
  15. Midland MicroMobile 15w GMRS Install

    Voodoobones - just use our Mic Mount and you can place the handset so you can easily see if from the driver's seat. MicMount
  16. Midland MicroMobile 15w GMRS Install

    Looks like there is plenty of room. And, as a suggestion, you could have the remote mic extension cable plugged in to the tucked-away unit and have the end of it poke out under the console. This way you can plug in the mic and disconnect it quite easily if you are parked in a sketchy area.
  17. Midland MicroMobile 15w GMRS Install

    Exactly. Whatever works. Zip ties, 3M Gray double stick tape, or a combination. Don't bother with the slide-in mount. The unit is small enough that I think you can find places as flharleycop did.
  18. GMRS antenna mount

    VERY nice install Steveo!
  19. Midland MicroMobile 15w GMRS Install

    I'm sorry, this is not correct. The sound from the radio comes from the microphone, NOT from the "brain" box. As such, it works identically to the Cobra 75WXST.
  20. Midland MicroMobile 15w GMRS Install

    Yes, see if you can find a location that is hidden/out of the way and where you have sufficient length on the microphone cord. Know that it is simple/inexpensive to add an extension cable to the microphone. Another advantage securing the MXT275 "brain" out of sight is that you reduce...



Advertisement
Top