Search results

  1. Baja Design LP6 wiring complete circuit with Aux3 and Aux4 + Amber

    Yes I omitted to reduce all those wires. It just gets too busy in the diagram. Good luck! RT
  2. Baja Design LP6 wiring complete circuit with Aux3 and Aux4 + Amber

    Here is a simplified diagram showing the actual Relays and the supplied Deutsch connectors. Let me know if this helps. or if this is better: RT
  3. Baja Design LP6 wiring complete circuit with Aux3 and Aux4 + Amber

    Here is a simplified diagram with views looking from the bottom of the relay. Very true and simplfied but with the 1 relay setup, you will need to keep Aux1 switched on to power either Lo or Hi. That method works, yes but the intent of the 2 relay was to be able to activate Hi beam with just...
  4. Baja Design LP6 wiring complete circuit with Aux3 and Aux4 + Amber

    Note for others who may be trying to follow: This is referring back to the original design with aux3 and aux4. Does not apply to current aux1/aux2 revision. Just to clarify. 1st relay determines where to draw the current, either aux3 or aux4 depending on which is active or if both, it will pick...
  5. Baja Design LP6 wiring complete circuit with Aux3 and Aux4 + Amber

    That is correct. The 1st diagram is for use with Aux1 and Aux2 because it will supply enough current and not blow the fuse. The 2nd diagram is what I have since switched and uses Aux3 and Aux 4. This 2nd diagram is how I rewired and is working also. Let me see if I can draw up something with...
  6. Another exhaust sound test. JEGS Turbo muffler on 3.6L

    Hey, Big Hoss, I am sure it would sound just as good. I too shopped around for weeks, listening to each exhaust system on youtube and decided to go with MBRP because of the deeper tone. Their tubes are really good quality and the mandrel bends are perfect. Plus, the 19" MBRP muffler can is the...
  7. Another exhaust sound test. JEGS Turbo muffler on 3.6L

    The MBRP system does fit the 2021. The MBRP Stock can sounded pretty good to me. But it was a bit loud for the backseat passengers (my teenage kids). So with that, I wanted to try different mufflers to see what each one would sound like. I went from Straight pipe MBRP system to Flow Master then...
  8. Another exhaust sound test. JEGS Turbo muffler on 3.6L

    I really like the sound of this muffler. Quiet at low Idle and cold starts. A bit louder when on the gas but there are no drone or resonance in the cabin. The polished stainless looks really nice. It was the lightest stainless muffler I have tested so far, about 6 lbs. I mounted this on to my...
  9. Baja Design LP6 wiring complete circuit with Aux3 and Aux4 + Amber

    After several days of testing I blew the fuse on the Aux3 and Aux4 so decided to measure the current drawn for Hi or Lo beams without any relay load. Low beams, both LP6 on: 10.4A High beams, both LP6 on: 25.8A It is apparent that Aux3 and Aux4 is not enough to power the LP6 because the inline...
  10. DIY Fire Extinguisher stainless mount on rear roll bar

    Good point. I has been mounting them on the passenger on both my UTVs because I can just reach back to grab them. On the Jeep however, its a bit too far to reach from the dirver's seat. I probably should move it to the driver side. RT
  11. DIY Fire Extinguisher stainless mount on rear roll bar

    I've always wanted to mount a fire extinguisher on to the Jeep's roll bar but just can not seem to find the wright looking one especially one that will use the Quick Release type that comes with the Extinguishers. I don't like complex or bulky contraptions or Velcro. This was the reason I...
  12. Baja Designs are Not JL Rubicon Install Friendly with their Harness

    For those who are somewhat conformable with soldering and technical, here is a DIY writeup on a circuit that would allow the use of Aux3 and Aux4. This design insures Hi and Lo beams are never energized at the same time and Aux3 or Aux4 switch can be turn on independently or together. With the...
  13. Baja Design LP6 wiring complete circuit with Aux3 and Aux4 + Amber

    Wanted to share the electrical connection to Baja Design LP6 using the factory Aux1 and Aux2 switch. This circuit insures that Lo and Hi beams (pin 1 and 4) are never energized together at the same time. I used 2 automotive relays, one of them was setup to isolate high and low beam, similar to...
  14. Giveaway & Promo: Hothead Headliner and Sound Assassin For JL / JLU!

    Count me in. Would be great if we can upgrade to other colors too.
  15. NorCal Marketplace

    Looking for a stock resonator complete. Don't need the muffler in the BayArea. Let me know. Thanks
  16. High clearance cat back while keeping a quiet exhaust? Yes.

    Here is the video with the sound tests. The video camera dynamically compensates for low or high sound pressure so the exhaust sound louder that it actually is. The decibel meter is a better reference.
  17. High clearance cat back while keeping a quiet exhaust? Yes.

    I had been looking for a high clearance exhaust system that would produce a very mild sound increase. I got a good deal over the Holiday on the MBRP full stainless Cat back, high clearance system. Other full cat back system should work just as well like Pypes etc. I picked MBRP because of the...
  18. Just a test. Straight pipe on a 3.6L 6-speed. Loud.

    In case anyone is curious what a 3.6L Jeep with no muffler or resonator sounds like with just an exhaust pipe to the rear. I made a video with some test runs using a decible meter taking measuremets inside and outside the Jeep. Not open headers but a cat back system. Its a 2.5" tube straight to...
  19. Installing Garmin or any Dashcam. Tap power from auto dim mirror

    DIY on how I installed my Garmin Dash Cam 46 and tapped the power off the auto-dimming mirror so the Dash Cam would only turn on when the start button is in Run or ACC mode. My Jeep has the Advance Safety Group package which includes a big box right behind the rear view mirror. The box is large...
  20. Let's see those 2-Door JL pics!

    2021 JLR in the Northern California Mountains.



Advertisement
Top