Search results

  1. Oil plug recommendation?

    I went with a "No-Spill" drain plug and have been please with it. It's not magnetic it's just another option offered. https://www.nospillsystems.com/
  2. Is the JL the worst Jeep ever?

    Explains why it was pre-owned. Good luck.
  3. Anybody not have the Aux switch bank in the JLUR? What do you use spot for?

    I have the aux switches but made a new panel for the left side. With the room you have you could make one big customized switch/gadget panel. https://www.jlwranglerforums.com/forum/threads/aux-switch-bin-repurposed-locker-accessory-switch-bank_updated.51314/
  4. Transfer Case MP3022C fluid change

    Owners manual states 30K mile "Level Check" and in case of severe service at 60 mile "Replace fluid".
  5. Rock Hard 4x4 Patriot Series Rear Bumper with Tire Carrier

    No major problems with the sensors on the RH bumper. I did observe a slight change in the detection window behind the vehicle but nothing I would consider a show stopper.
  6. Transfer Case MP3022C fluid change

    Did a fluid change today and was surprised with the amount of fluid that drained out. According the the service manual the capacity was listed at around 3.72 pints the actual was 4.5 pints. Just a heads up for anyone who is planning on doing a change. For most it will only matter if you bought 2...
  7. 1971 CJ5 - Saratoga NY Auction

    Just some Jeep eye candy. Nice rig! https://www.saratogaautoauction.org/vehicles/1491/1971-jeep-cj5
  8. Rock Hard 4x4 Patriot Series Rear Bumper with Tire Carrier

    Edit: Pics Added. Also saw that I had used anti-seize on the SS hardware as a precaution. Yes, just be sure the end of the tow harness is able to hang out of the hole a couple of inches (should be no problem with slack) The rest of the connecting can be with the bumper on. I'll post a few pics...
  9. Rock Hard 4x4 Patriot Series Rear Bumper with Tire Carrier

    I haven't heard anybody with issues with the aluminum bumpers in the winter/salt states. If you go the route of painting bare aluminum I would school up on it as there are different variables to consider. Steel to bare aluminum contact with road salt do not not end well you only have to read the...
  10. Rock Hard 4x4 Patriot Series Rear Bumper with Tire Carrier

    IMO if you purchased painted items I would apply a few layers of clear clear coat semi-gloss or flat coat to seal the surface. Surface prep with 320 and de-grease prior to application. Take your time and do it right it'll pay off. I've had good results with Rustoleum. I'd do that before the...
  11. Question regarding the Windsheld defrost

    In post 398 I provide the dimensions for what I made. Coupled with #391 you should be able to make it up quickly. A few dollars in aluminum stock from home depot/Ace Hardware, some zip ties and the metal punch which you'll continue to find uses for is all you need.
  12. Rock Hard 4x4 Patriot Series Rear Bumper with Tire Carrier

    Completed the front bumper. Stripped the old "powder coat" with 60 grit and a palm sander followed by degrease and metal prep. Instead of using Rust-oleum automotive rust-reformer on the front I went with 2 coats of POR15 rust preventative epoxy coat followed by 3 coats Rust-oleum semi-gloss...
  13. Anti-Rust For Exterior Mods

    Clear semi-gloss or matt UV protective topcoat, many good brands to accomplish that. Use 320 grit to prep, wash n degrease and coat. This is for non-rusted preservation. For rusted I used a palm sander with 60 grit sand paper, Wash n degrease, Por metal prep, Por 15 coating and 3 coats of...
  14. Flashing rear locker light... bad hall effect sensor? Jeep won't warranty, part not available for puchase!

    I'm thinking: Pin 1: Power in, Pin 2: Pwr Return, Pin 3: Sensor signal Out.
  15. Flashing rear locker light... bad hall effect sensor? Jeep won't warranty, part not available for puchase!

    That's why I was hoping to get the part number or a closeup pic of the sensor part number so I could research it more. Calibrating each sensor to each axle seems like a line of BS from TE. The sensor's job is pretty simple "1" Yes. locker is on, "0" No. locker is not on. Even Eli Whitney figured...
  16. Flashing rear locker light... bad hall effect sensor? Jeep won't warranty, part not available for puchase!

    Here's a site which might help with the search https://www.findchips.com/
  17. Flashing rear locker light... bad hall effect sensor? Jeep won't warranty, part not available for puchase!

    Did you happen to notice a part number on the hall effect IC?
  18. “Service Axle Locker System” Light On

    If you truly feel your lockers system failed in an "activated" un-safe state versus a fail safe state "won't turn on" then you might have something with teeth to report. I think another op reported this happening. IMO I would go the NHTSA route and report exactly what you experienced to them...
  19. New York ARB CKSA12 compressor, JL Under seat bracket & spare parts: $175

    Installation instructions attached



Advertisement
Top