I havent been able to flex them yet, so i dont have a full opinion. I have noticed a difference in the dual rate to triple rate. The triple rate are very picky with top spring isolators. I've had to rotate those tope pads so many times to get the springs to sit just right. Didnt seem to have...
Made it shine :rock:
Also: learned things while “tinkering”: for Xmas I got us the RK 4.5” springs. I found that the rear went up too much and created a rake, so went back to the MC3.5 in the rear. Still running the RK4.5 up front. Haven’t been able to flex yet.
That's correct! You can combine both "high powers" together and wire to an AUX. COnnect the 2 ambers together and wire to an AUX. Ground to a grounding location. No need for the wiring harnesses.....the relays are built into the AUX system.
ha, no magic: insurance. I now need a 4th, but the last one I got seemed better than OEM. It took a rock and didn’t spider, it’s the only alternative to the OEM; apparently the only difference is that it doesn’t have the Jeep on it. I feel that it’s different glass.
Thanks! They are the Quadratec lights - https://www.quadratec.com/p/quadratec/pre-runner-led-light-kit-jeep-wrangler-jl
They wire "in-line" with the side marker wiring. I pulled the wheel and the liner and bazinga!
Finally got around to something that i've been wanting to do for a long time: black grille! The Mojito Mopar build definitely influenced me in the Mojito pick. Did the grille, Quadratec grille lights, winch isolator and AUX 3/4 winch in/out.....just catching up to @BbyGrlJJ :)
Snow for us as well (STL). Not a lot of actions shots, but was awesome to fly around the highways.....showing off some new lighting! There's really nothing better to me than ripping around in a Jeep when no one is on the roads and snow is coming down! I will wake up in the middle of the night...
Had to give a little attention to the rear end:
New bumpers (Motobilt Crusher) - https://motobilt.com/collections/jeep-jl-18-current-year/products/jeep-jl-rear-bumper-crusher-with-light-mounts-with-spare-tire-cut-out-2018-present-wrangler-jl
License Plate relocation - Artec -...
Lots going on here!! You gotta pay attention to the rear end, of course! @BbyGrlJJ ;)
Started with Synergy bracket, for eBrake re-route:
She got me/us rear bumpers for XMAS - Motobilt crusher! Love the cube cutouts, not full and shackle mounts! @Stormin’ Moorman she wore her "winter bikini"...