I see there are a number of different calculators out there.
That said they are often difficult to follow and usually give way to much information. So I did my own if anybody else is considering doing a swap and wants to explore more.
On this one, you can play with the RPM and look at...
It took my 2 days of stressing about drilling holes for the rack. After I just went with it and installed the rack, then drilling an extra hole for the wiring seemed minor in nature. If you are looking at racks that you don't have to drill any holes in the hardtop, then you will probably find...
JL flares off my JL for sale
(yellow wrap) 900 including Front and rear fender flares, front inner fender flares & led indicators / drls.
Alloy / black texture powder coat / come with brackets to fit rock lights pointing inwards.
pick up in southern CA. El Cajon
Shipping $150 lower 48...
I have a Sport S with the LSD Dana 44 Rear with stock Gears on 37s.
It looses all the benifits of the 8spd and zippyness. Gets stuck in 4th or 5th on the highway.
In low 4 I've also got to the point where it doesn't have enough torque to climb a very (extreme) rock face either. It would have...
Wired up my KC Rack Lights.
This is how I routed the wiring through the hard top and to the battery.
1. Drill hole in hardtop to match (or 1/8th smaller ) than the wire conduit.
2. Conduit / tape wiring up to the hole.
3. Silicon conduit and wiring at the hole.
4. Pull 10 - 12 inches of wiring...
I bought the Sport S with the 7" screen and the power options because i was going to change the flares anyway. The only thing i didnt get was the leather seats. Now with all the savings, I have done new flares bumpers, sliders, etc. so that was the best direction for me as I was throwing away...