Search results

  1. Auxiliary (AUX) Switches Configuration/Installation DIY

    The only connections you need will be the black (negative) and red (positive). Delete everything from the provided switch to the back with the exception of the fuse holder. Here is the reason you will want to keep the fuse holder. The factory circuit has a 15 amp fuse and you may not need that...
  2. Memorial Day Jeeps - Flags!!

    Chassis = frame. Why would you mount a flag there? Maybe if it could fly.
  3. Verified: CB Radio Pre-Wired in New Wrangler

    This adhesive type mount does NOT provide a ground as there is no mechanical fastener to the panel it is attached to. The Comet B20 antenna is NOT a ground independent antenna and does require a ground at the antenna base. The panel of glass the antenna whip is next to has a grounded grid...
  4. EPA MPG numbers published for 2.0L Turbo Wrangler JL

    Actually I am waiting for the diesel to come out. I just wish the start - stop requirement would go away but that will never happen.
  5. EPA MPG numbers published for 2.0L Turbo Wrangler JL

    That Cherokee does NOT have the ETorque system that the Wrangler does. HUGE difference! Electric motor torque is 100% available from 1 rpm to max rpm. Gas powered Torque is variably available when rpm is in the torque curve usually starting at ~1500 rpm, peaking at ~2500 rpm. Look at the specs...
  6. CB Antenna Mount, What I Did

    Good write up on how to run the antenna cable but you missed the mark on basic antenna functionality. All antennas need a ground plane and need to be up and away from surrounding metal body parts to effectively send the signal out without having it sent back to the radio, also known as high...
  7. Auxiliary (AUX) Switches Configuration/Installation DIY

    I would hope that the dealer would possibly perform that reprogramming gratis with the "Wave Program." I cannot speak to the instructions. I am waiting for the 3.0 ecodiesel before I place an order on a JLU Rubicon model and I will be specify the Towing / HD electrical package to get the higher...
  8. Auxiliary (AUX) Switches Configuration/Installation DIY

    If you go to the Quadratec website and look up the switches in aftermarket Mopar accessories they also have a nice video explaining which kit to order. Sport & Sahara has a half storage cubby for the driver side and the switch assembly. Rubicon version only comes with switches because the driver...
  9. Gas mileage so far

    The TFL guys Sahara model was equipped with a 2.0 liter turbo not a 3.6 liter. That's why they got such good mileage.
  10. JL Rubi - driving at highway speed on snow/ice/wet with 4H

    Why buy a Wrangler that you cannot get to have all the wheels to apply power to the ground? At best Sahara will power 3 if you order the anti-slip diff in the rear axle, without that you get a pair of open spool gears in the diff and have one wheel on each axle applying power.



Advertisement
Top