Sold: Arizona Adams 1310 Front Driveshaft

[4xnaz]

Completely rebuilt 1310 front Adams Driveshaft. Save $200 from new for a practically new shaft. Offered to you, for what I paid to have it completely rebuilt at $400. It was installed on a 2018 JL Rubicon with a 3.5" Metalcloak lift. Includes Transfer Case Yoke. Just rebuilt today and not reinstalled because I am upgrading to a 1350. Also pictured is the OEM shaft for reference only (not included) unless you want to make an offer on it.

Sponsored

 

[4xnaz]

STILL AVAILABLE...Everything needed for install is included, (1310 Adams front driveshaft, transfer case yoke, hardware and red loctite) This is good as new after its rebuild. I upgraded to a 1350. Only $400.00 for everything!!!

***FREE SHIPPING***
Until April 1st, 2020
Domestic only, excludes Alaska and Hawaii

 

[SSinGA]

i'm interested.

PM sent

 

[RubiCoug]

Random question, is the 1310 lighter than the stock shaft? It's obviously stronger....

 

[4xnaz]

Random question, is the 1310 lighter than the stock shaft? It's obviously stronger....

The Adams front driveshaft weighs in at 25 pounds and the OEM Mopar front shaft, to the Dana 44, weighs in at 19 pounds.

Food for thought.....

 

[RubiCoug]

The Adams front driveshaft weighs in at 25 pounds and the OEM Mopar front shaft, to the Dana 44, weighs in at 19 pounds.

Food for thought.....

What's the weight of the 1350?

 

[4xnaz]

What's the weight of the 1350?

Believe it or not, but also at 25 pounds.

 

[delgadoderek]

i got a 2018 JLU sport, wondering if this would work ? i got a 3.5" rock crawler lift. So many questions and don't want to blow money if its not going to work. My current stock drive shaft is grinding due to angle at about 20 mph and can't find exactly the info I'm looking for on the web other than to get it replaced. possibly interested if available still and if it will work.

 

[4xnaz]

i got a 2018 JLU sport, wondering if this would work ? i got a 3.5" rock crawler lift. So many questions and don't want to blow money if its not going to work. My current stock drive shaft is grinding due to angle at about 20 mph and can't find exactly the info I'm looking for on the web other than to get it replaced. possibly interested if available still and if it will work.

I wouldn't want you to spend your money either if it won't work, and I'm not sure it will. Adams shows a different part # for the Sport over the Rubicon due to the different axles.

 

[ChattVol]

I wouldn't want you to spend your money either if it won't work, and I'm not sure it will. Adams shows a different part # for the Sport over the Rubicon due to the different axles.

Really strange bc my stock sport driveshaft bolted up to rubicon jl axles. I later added rubi jl t-case and it also bolted up.

 

[Chocolate Thunder]

Still got this?

Sponsored