RenegadeJeeper
Well-Known Member
Figures I would post better shot of mine
Sponsored
Can you tell/show us more about this? (please)Most challenging part was getting to the wire harness for the turn signal. It’s mounted in an obnoxiously awkward position. Of the two hour install, that probably took half of it
Thanks for posting your pic but now I'm having second thoughts as the lights (in your pic at least) seem to be much larger and brighter than what I see on my/other Raptors and on the Taco's I see with them. Is that the case?Figures I would post better shot of mine
The wire that you plug into is mounted upside down under a metal body panel in the engine bay. The directions say to access it from under the wheel well, but unless you remove the plastic wheel well trim, that’s not possible.Can you tell/show us more about this? (please)
Only because I have a Raptor would I add these to my JT. Thanks for your help and info
thanks!The wire that you plug into is mounted upside down under a metal body panel in the engine bay. The directions say to access it from under the wheel well, but unless you remove the plastic wheel well trim, that’s not possible.
so I decided to go in from the hood. It’s awkward (but not impossible) to reach, but once you do it’s a very easy install