20x10 -18 offset

[jellis4148]

ok, so I’ve searched and searched. I’ve found some pretty vague answers, but nothing definitive. As the title states, the wheel I want is a 20x10 -18 offset with a 35x12.50 ridge grappler. I don’t have a lift and I have a 2019 Rubicon. Can anyone tell me, for sure, if it will rub at full turn? I know it’s been asked, but nobody really answered. So, please, if you are running this on a stick Rubicon, please provide pics and let me know if it rubs. I’ve even called tire shops and some say they will a little and some say it won’t rub.

Sponsored

 

[jellis4148]

Anyone??

 

[XJrider]

Dont be that guy who does 20” on 35’s....

 

[XJrider]

Offset is the relationshit of where the lugs are mounted. Neg offset pushes the wheels out so yea it’ll probably fit.

 

[jellis4148]

Dont be that guy who does 20” on 35’s....

Sorry, I like the way it looks. I'll still go off road, just nothing super extreme. Doesn't matter what tires I have on it, I would risk hurting something.

 

[jellis4148]

So, you guys don't think they will rub?

 

[Shots]

According to a rim/tire calculator the tires will stick out roughly 3.7" further than the stock set. You'll have more clearance with the suspension and brakes than the stock set so no issue there. A stock Rubicon can reportedly fit 35's without rubbing, though I'm not sure if that is just driving or if it includes during articulation of the suspension.
Long story short, the fact that they're pushed out so far is going to be the main concern. You can have someone slowly turn the wheel both directions while you either measure the gap, or hold a "gauge" on your stock tire to see if it his anywhere. This will at least give you a baseline, but again won't address clearance during articulation.

 

[jellis4148]

Hopefully, I'm not wrong when I measure. These can't be returned if they don't work. Was hoping someone out in Jeep land had tried it, and knows for sure.

 

[jhernandez]

ok, so I’ve searched and searched. I’ve found some pretty vague answers, but nothing definitive. As the title states, the wheel I want is a 20x10 -18 offset with a 35x12.50 ridge grappler. I don’t have a lift and I have a 2019 Rubicon. Can anyone tell me, for sure, if it will rub at full turn? I know it’s been asked, but nobody really answered. So, please, if you are running this on a stick Rubicon, please provide pics and let me know if it rubs. I’ve even called tire shops and some say they will a little and some say it won’t rub.

So did you get this done 20x10 -18 offset with a 35x12.50 ridge grappler no problem no rubbing?

 

[RubiBlu19]

20x12 -19
35” Nitto Terra
No rubbing at all Stock height.

 

[SteeleMoab]

Hey. I’m looking at the same setup. Do you have pics?

 

[Shack]

I have 20x10 rims with -18mm offset with 37x13.50 tires with no lift and no rub lock to lock. I did a fender chop but I'm pretty sure I'd hit the fenders at flex.

Sponsored