PJRider
Member
- First Name
- Patrick
- Joined
- Jun 28, 2019
- Threads
- 5
- Messages
- 10
- Reaction score
- 1
- Location
- Austin, TX
- Vehicle(s)
- JLUR
- Thread starter
- #1
Have the Tazer JL MIni with 11.1.1 on a 2019 JLU.
The Winch Mode setting (press left arrow and cruise RES at same time) that holds RPM's at 2000, I cannot consistently get it to stop. The documentation says that "It will NOT raise if you touch the accelerator pedal, and will cancel if you do."
I read this as touching the accelerator will cancel the winch mode hold. One time it worked after multiple attempts -- with me stepping on the accelerator -- 3,000 RPM, etc."
Another time I couldn't get it to cancel and just turned the engine off.
Is this by design or should it cancel. And, happy to flash to newer version but before I did wanted to know if this is working as intended.
Thanks.
The Winch Mode setting (press left arrow and cruise RES at same time) that holds RPM's at 2000, I cannot consistently get it to stop. The documentation says that "It will NOT raise if you touch the accelerator pedal, and will cancel if you do."
I read this as touching the accelerator will cancel the winch mode hold. One time it worked after multiple attempts -- with me stepping on the accelerator -- 3,000 RPM, etc."
Another time I couldn't get it to cancel and just turned the engine off.
Is this by design or should it cancel. And, happy to flash to newer version but before I did wanted to know if this is working as intended.
Thanks.
Sponsored