usmcss
Well-Known Member
- Thread starter
- #1
I just installed the XRC Gen 3 and used the Warn Winch Plate that’s used by Mopar. The SmittyBuilt Fairlead and Warn Filler Plate have a lot of play up and down until you tighten the bolts down due to the larger holes in the Winch Plate.
The concern I have is if the winch is recovering a vehicle on a down slope, the force of the rope will put so much pressure on the Fairlead that it will slip.
Anyone else notice this?
The concern I have is if the winch is recovering a vehicle on a down slope, the force of the rope will put so much pressure on the Fairlead that it will slip.
Anyone else notice this?
Sponsored