The mount is a CP-5NMO. The two radios transmit and receive at different enough frequencies that interference isn’t a problem.
I never thought I’d see the day they didn’t put instructions in the box, but I guess that’s the word we live in now.
.
Your wife is awesome. Mine would throw it away haha. I like it, sleek looking. Looks good manWhen I got home from work today the wife had me all set up for the install....
The install is pretty straight forward, good instructions. You have to download them off the computer....
You definitely need an extra pair of hands in a couple of the steps. The hardest part of the whole install is mounting the spare tighten lugs, push it against the tire carrier mark where the bracket is, then take the tire back off, tighten bracket, then lift that heavy ass tire again....
The older post of this install I read had the third brake light mounted behind the rim, now it’s mounted over the camera housing. The wee little torx screws holding the camera ended up being to short with the brake light bracket mounted so I had to round up some longer ones.
@Moto_21 the carrier weighs 50 lbs. And I’m not sure, but I think this hole looks like a spot for a cb antenna, and there’s a couple threaded holes I think for rotopax or high lift jack bracket and such.
All in all, I’m really happy with the way it turned out, I’ll post after I hit the trail to see if the rattles gone. I’m guessing it is because I used to be able lift the tailgate and recreate the noise , now I can’t......
Looks great dude, do you still have DRL ? I see the little light on the side, assuming that’s the turn signal? Could you post picture with lights on?Artec Industries fender chop kit put on.
Where did you buy these?Upgraded the 2.5” OEM dash and roll bar tweeters to 3.5” plug and play Kicker speakers and also put poly fill behind the 4” woofers in the roll bar. Noticeable improvement for $110 and about a 20 minute job.
I had given up. But maybe I'll get some of the B'laster and give it another go. Thanks for that suggestion!
RH stated 100 ft-lbs. On the passenger-side, there's a small cover I had to remove to get a 1" socket in there. That yellowish goop at the end of the socket is the B'laster on the washer...wipes right off. It stinks, but smells like...victory.
Holy shit ! I am shocked ! Its a freakin amphi car ! Were you wearing waders for that excursion ! ?Gave it a bath at AOAA and some official testing of my Yeti setup. Does that count as a TO your jeep?
View attachment 229845
View attachment 229848
