35" and 37" JL pics with lift kit

[ReidJL75]

35’s with no lift.

Are these 20's? 35x12.5x20? Spacers? Anymore pics showing how far they stick out from the fenders? Are the ridge Grapplers noisy? I'm debating these tires with 18" wheels. Thx

Sponsored

 

[jeepfandotcom]

They are. Happened to be at my local dealer. Great wheel, light, concave, looks great in person.

I have a Firecraker on order..these should look great on there. I really like the factory wheels but I think 37x12.50's are pushing their 7.5" width. Thanks for the info.

 

[Jabs]

@ReidJL75

Yes they are Nitto Ridge Grapplers 35x12.5x20

No spacers since the rims have a -18mm offset meaning they stick out 18mm.

So far I really like the ridge grapplers. Haven’t noticed any noise difference but only drove for about 50 miles on them.

 

[Mattyp1214]

@ReidJL75

Yes they are Nitto Ridge Grapplers 35x12.5x20

No spacers since the rims have a -18mm offset meaning they stick out 18mm.

So far I really like the ridge grapplers. Haven’t noticed any noise difference but only drove for about 50 miles on them.

Me neither, less noise than nokian snow tires on my wife's subaru right now

 

[PopsJeep]

May be a few more days. I was about to head out to my dealer to pick up my JL when he called to inform me that whoever is in charge of putting them in inventory messed up and marked them as on the lot. They have a three floor garage where they keep their inventory, and he said he spent 30 minutes walking the lot only to find out the four marked as delivered today were not actually there.

Is that at River Oaks Chris?

 

[TTEChris]

Is that at River Oaks Chris?

Yes it was. I can't complain though bc Mark has been really awesome to deal with overall.

 

[JayV]

May be a few more days. I was about to head out to my dealer to pick up my JL when he called to inform me that whoever is in charge of putting them in inventory messed up and marked them as on the lot. They have a three floor garage where they keep their inventory, and he said he spent 30 minutes walking the lot only to find out the four marked as delivered today were not actually there.

Uuuuuggggghhhh!!! Was about to send you a congratulatory message then saw this.

 

[Brodiec27]

Installed 2” Mopar lift w/ 37” tires and the ABS light came on and can not reset also the backup camera does not work now. Any help would be appreciated

 

[Silverblkrilla]

Installed 2” Mopar lift w/ 37” tires and the ABS light came on and can not reset also the backup camera does not work now. Any help would be appreciated

ABS stands for "A Badazz Setup" good looking jeep. Sorry I'm no help.

 

[Penance81]

I had mine installed at the dealer so I'm no expert. It might be worth checking the connectors that you disconnect during installation. Check steps 12,13, and 38 on the Mopar guide and make sure they are seated good.

 

[Turbo50]

35’s with no lift.

My backup camera looks like this now. Anyway of fixing this?

It Looks really good.

 

[HardRockSteele67]

35’s with no lift.

My backup camera looks like this now. Anyway of fixing this?

Sweet, exact wheels im doing on the wifes blue in pending due to top constraint

 

[Jabs]

@ReidJL75

Took some pics of the -18MM offset for you. First car I’ve had with a negative offset. I love the look just tough getting used to going through drive thru’s, parking, etc. I’m sure with time I’ll get more used to it!

Also will note that car feels a little slower on initial acceleration but more planted when driving. Thinking it’s because of the wider and heavier tires.

 

[ReidJL75]

@ReidJL75

Took some pics of the -18MM offset for you. First car I’ve had with a negative offset. I love the look just tough getting used to going through drive thru’s, parking, etc. I’m sure with time I’ll get more used to it!

Also will note that car feels a little slower on initial acceleration but more planted when driving. Thinking it’s because of the wider and heavier tires.

Looks awesome. Thank you!

 

[Brodiec27]

I had mine installed at the dealer so I'm no expert. It might be worth checking the connectors that you disconnect during installation. Check steps 12,13, and 38 on the Mopar guide and make sure they are seated good.

Will check it out. Thanks

Sponsored