Tazer on 315/70/17 Patagonias

[Pig-Pen]

did a quick install of the tazer yesterday as i had to leave (and take jeep). watched video on YT real quick and he said to get it as close to the tire size. so i chose 35". shifting seemed better before the tazer lol. though mpg seems to have improved a bit.

for those of you running this tire in this size, what did you set the tire size to with your tazer? im going to be wrenching on my jeep all week so i probably be able to change it to the next lowest setting so i figured id ask.

Sponsored

 

[Ctaylor1432]

You should measure actual tire height and set as close as possible. I think my 35’s measured at 33.5”.

 

[WranglerMan]

I’m running 315 KO2’s and have my tire size set to 34.49” and it’s spot on from 75mph and down, as far as shifting going the JL relearns the shift points after 200 miles but with heavy off-road tires on it your not gonna see 8th gear that often unless you regear.

 

[Trav.city]

I have the 315/70 R70 Patagonia’s and 34.60 is dead on at 70 MPH. I have a Rubicon which has 410 gears so 8th gear is still seen when cruising and taking it easy. I have read as the tire wears you might have to adjust the setting from time to time. Good luck.

 

[coolking]

I have the 315/70 R70 Patagonia’s and 34.60 is dead on at 70 MPH. I have a Rubicon which has 410 gears so 8th gear is still seen when cruising and taking it easy. I have read as the tire wears you might have to adjust the setting from time to time. Good luck.

Worked for me. Thanks

Sponsored