RenoMD
Well-Known Member
- Thread starter
- #1
I installed a Dynatrac lift don’t need these. They are the 0-1.5” shocks only have 1500 miles on them. See my other thread for my review but they are a significant upgrade from stock shocks. https://www.northridge4x4.com/part/...ockpkg-fox-front-and-rear-shocks-0-1-5in-lift
Please note you will need to install the new correct collars with spacers in the lower shock mount. Fox didn’t do this before shipping these out. Turns out they were supposed to install ones with a step washer/spacer (shown). The incorrect ones are a little mangled. You can easily press them out or drive them out with a bolt and hammer. Then push the new collars with the correct spacers in. There are scratches on some of the lower mount from using a pry bar to line up the shocks to put the bolt in them.
$300 shipped and insured. Brand new expect to pay $520.
Please note you will need to install the new correct collars with spacers in the lower shock mount. Fox didn’t do this before shipping these out. Turns out they were supposed to install ones with a step washer/spacer (shown). The incorrect ones are a little mangled. You can easily press them out or drive them out with a bolt and hammer. Then push the new collars with the correct spacers in. There are scratches on some of the lower mount from using a pry bar to line up the shocks to put the bolt in them.
$300 shipped and insured. Brand new expect to pay $520.
Sponsored