Wiring with no aux switches

[jonsavino]

I have no factory aux switches and Im looking to install some cube leds. Do i just ground and attach to battery? or is there somewhere i can connect to?

Sponsored

 

[SikkoBassta]

You should buy an aftermarket wiring harness with a switch. Otherwise your cubes will be on all the time and they are generally ultra bright...so you might either drive illegal or blind/piss every driver you pass off.

 

[iamstillvince]

if it didn't come with harness, they are pretty cheap, harness will have a switch,fuse and a relay all put together for you. you will need to run the switch part inside jeep then power leads connect to battery or use a fuse tap so its off with ignition, then to lights.
that's easy and cheapest way, lots of options up from there.

Sponsored