What did you do TO your Jeep JL today?

[Roky]

I am running 35's and mine is resting on the number also. I can only imagine how tight it is with the extra inch stuffed into the bumper

It just barely hits on the two corners, doesn’t touch the lower center part, here’s some close ups. Door opens and closes easily, can’t even feel it hitting.

 

[BostonBilly]

It just barely hits on the two corners, doesn’t touch the lower center part, here’s some close ups. Door opens and closes easily, can’t even feel it hitting.

Shit mine hits the center and I can feel it and hear it squeak. I have the steel bumper option

 

[TylerR]

Added Yeti tie rod, drag link with their make your steering wheel not jiggle doohickey, and relocated the stabilizer up adding their neutral dampener. Steering and stability is massively improved. Should be on everyone’s list, lift or not.

 

[Roky]

Shit mine hits the center and I can feel it and hear it squeak. I have the steel bumper option

That’s the difference, I’ve got the crappy plastic bumper... lol.

 

[TrailTorque]

Added Yeti tie rod, drag link with their make your steering wheel not jiggle doohickey, and relocated the stabilizer up adding their neutral dampener. Steering and stability is massively improved. Should be on everyone’s list, lift or not.

Yeti makes more than coolers and cups now?






Lol

Lookin good under there!

 

[msujedi]

Previously created my own headliner with dense foam & faux leather upholstery. But, the adhesive yellowed on the white plastic around the upholstery. Today I painted the white parts of the freedom panels. I'll reattach the hardware tomorrow.

 

[bull1055]

Installed brawlee led light on JLUS

1. Removed black plastics

2. Ran fish wire. I ran a cat 5 cable. Just push from top to bottom. Should come out bottom end.

3. Installed led bar

4. Taped the led bar cable to my fish cable and pulled out the other end. Clean look

Right now it’s powered by the 12v outlet. I’ll be wiring it to the dome light in the next couple of days.

 

[TrailTorque]

Installed brawlee led light on JLUS

1. Removed black plastics

2. Ran fish wire. I ran a cat 5 cable. Just push from top to bottom. Should come out bottom end.

3. Installed led bar

4. Taped the led bar cable to my fish cable and pulled out the other end. Clean look

Right it’s powered by the 12v outlet. I’ll be wiring it to the dome light in the next couple of days.

Nice!!

305 world wide baby!

 

[19 JLUR Bright Whit3]

I installed the 3rd generation Mopar 2in lift (7707 2395 AC-001) and a Smittybuilt 12K on a JCR winch plate. A few notes in case you're contemplating the same setup: The front bumps stops are a pain. I had to use a pipe wrench to hold the stops from spinning. The passenger side went on easier if you attack it from the rear by removing the brake line bracket attached to the spring mount. The LCAs are tight! I got about 2.5in the rear and 3in up front. The winch sits about a inch low on the JCR mount. The first spool line touches the bumper lip. The Rubicon take offs will be listed soon.

 

[pichenet]

I ordered my flag decals from pixeldecals today. I rotated the tires and added my 1.5" spacers and black lugnuts. I also tried my homemade jig for pulling the hardtop, so now I can do it myself. I am happy with all the changes and the jig

Hi - do you have a link for the spacers?

 

[KCC_703]

Installed brawlee led light on JLUS

1. Removed black plastics

2. Ran fish wire. I ran a cat 5 cable. Just push from top to bottom. Should come out bottom end.

3. Installed led bar

4. Taped the led bar cable to my fish cable and pulled out the other end. Clean look

Right now it’s powered by the 12v outlet. I’ll be wiring it to the dome light in the next couple of days.

Nice and clean! Good to know that the Cat5 carries enough power to the light bar.

 

[Stormin’ Moorman]

How does that hood manage water. I looked at several aftermarket hoods and none had any provisions for water/rain management. At least here in the NW I would not want to expose my engine comparment to the elements,

So, Carroll Shelby put functional hoods vents on the Mustang Shelby's and Super Snakes. The motors costs more than our Jeeps. I think we'll be Ok, especially since everything under 30" on JLs is water proof and everything over 30" is water resistant.

 

[Muddog]

looks sharp! where did you order from?

Thanks! Amazon.

 

[FrenchSSGTMike]

Anybody in California or willing to drive there to pick up a set of KO2s on rims with TPMS for $500 ?!?! I would if I lived close for sure lol

https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/143245713970

 

[olmectech]

Installed Deegan 38 rock sliders.