What did you do TO your Jeep JL today?

[jmcdtucson]

End caps vs no end caps

What u guys think?

End caps look better to my eye.

 

[Roky]

Very nice! Care to share the “process”/how to, or maybe a link? I might have to do this. Cheap looking oem muffler bugs me

Sure... I just did what @Jo’s Jeep said he did, it was real simple. Cleaned it, sanded it with some 300 grit sandpaper, wiped it down with alcohol, and painted it with rustoleum high heat paint. I used flat black. Cost 10 bucks for paint and sandpaper and an hour of my time. This is definitely the cheapest mod I’ve done so far..lol....

 

[Roky]

I’m all for you, Roky, if it trips your trigger.
I just went outside, bent way down, saw my silver muffler, and thought, “why in Hell would anyone give a rat’s ass whether their muffler was silver or black, way up under there?”
Just me, I reckon.
Carry on.

Crazy isn’t it,? What some people don’t give a second thought to drives the next guy nuts.. lol

 

[brazos]

Crazy isn’t it,? What some people don’t give a second thought to drives the next guy nuts.. lol

Sure do appreciate that you took that in the lighthearted way I intended it. Stepping carefully lately.

 

[melendez69]

Well...... I decided to to go ahead and join the black muffler group, some told me it’s holding up great, some have warned me it will chip and peel off, some told me their process on how to do it which I followed, At least this way I’ll know for myself eventually, but in the meantime I like how it disappears and I’m glad I did it........

 

[FrenchSSGTMike]

And if you live in Pennsylvania, not for on road use either, lol.

Guys, you should come and try driving in Québec at the end of winter ! Lol

 

[Kenny]

Warning: more super hardcore tech to follow:

Installed the GPCA tie-downs on the rear. Used my Snappy gold Torx 'cause goddamnit overpriced Jeeps oughtta be serviced by overpriced tools

LOL

 

[jz19]

Funny how some things are $300 and I buy with no hesitation, but when it came to a $17 piece of plastic, it took me forever to pull the trigger. Well anyways thanks amazon for one day shipping. OCD tray for center console, made in the USA! Thanks to the users on this thread that posted it first.
Before and after:

I was JUST wondering if there's an organizer for the console, and BAM, here you post it. How deep is it? Can you send the link? TIA!

 

[robaw]

I was JUST wondering if there's an organizer for the console, and BAM, here you post it. How deep is it? Can you send the link? TIA!

. I have one too, it's fantastic! Should have just came like this from the factory.
https://www.amazon.com/dp/B07NB499FP/ref=cm_sw_r_cp_api_i_yfn1Cb7SMES1W

 

[jz19]

. I have one too, it's fantastic! Should have just came like this from the factory.
https://www.amazon.com/dp/B07NB499FP/ref=cm_sw_r_cp_api_i_yfn1Cb7SMES1W

Awesome - thanks SO much! Does it interfere at all with the USB 2 port? Just curious...

 

[slimfl08]

Decided to swap out the Fox 2.0 to the Falcon. Much better improvement. Took a test drive picture since Montana is awesome.

 

[robaw]

Awesome - thanks SO much! Does it interfere at all with the USB 2 port? Just curious...

No problem, I use that USB for my iPhone with standard Lightning cable and it works fine, plenty of clearance.

 

[jz19]

No problem, I use that USB for my iPhone with standard Lightning cable and it works fine, plenty of clearance.

Perfect - thanks!!

 

[bmchass]

All four corners on. It rides very tight. South Florida doesn't have any rock climbing but I have trails out in Big cypress. Very satisfied with the ride.

I installed the 3.1's as well and quickly bought the valve kit to make them 3.3's. The ride was super stiff.

 

[EEBob]

Found out that the handlebar makes for a nice iPad mount. Using iPad Pro 13” with Apple Keyboard.

Caution: That may interfere with passenger airbag deployment