Show the stickers / decals you've added to your Jeep Wrangler JL

[Jeepney18]

My work is done for the day!

Sponsored

 

[blessidsoul12]

My work is done for the day!

I appreciate the 18 instead of 29. Awesome, but I think your 18 should have gone where your Navy sticker is. Navy stick on back window?

Oh and just FYI, we've clocked the T-rex at 32 miles an hour.

 

[Jeepney18]

I appreciate the 18 instead of 29. Awesome, but I think your 18 should have gone where your Navy sticker is. Navy stick on back window?

Oh and just FYI, we've clocked the T-rex at 32 miles an hour.

I'll keep that in mind if I ever change it up.

This is what it looks like at night with and without flash.

 

[Link Pin]

Rawr.

Yep, that's a 10

 

[Kevin’s Rubi]

I just went to the website for @pixeldecals and saw that my order went from "ordered" to "manufacturing"! HAPPY DANCE!!!!!

 

[Crusifix]

I took some 3M Series 1080 matte black that was left over from striping my old mustang, and free handed the center strip with the help of Wrapcut tape. I also had some gloss red 1080 pin stripes cut and used that to outline the edge. It turned out fantastic, and was just made from crap I had laying around from other projects. So...freebee.

Also, just outlining with pin stripe is 1000% easier than trying to line up two slightly different sized decals. @pixeldecals , This might be a method worth looking into and offering as well.

 

[LunchBoxFab]

What rack is that?
.

Evo Manufacturing rack. Its not for heavy stuff like a RTT but it handles my gear well. i have a trailer for all the over landing stuff.

well built, everything went together well and very clear instructions. would recommend for anyone without a heavy weight requirement.

 

[Kona Damien]

I bought some Hyundai Kona logos, plasti dipped them Red and got some vinyl lettering to make my own “edition” JLUR. My wife’s Gladiator with get a set as well.

 

[Sleblanc63]

For those that want to do their own striping or accent decals.. whatever it may be, I recommend buying a roll or WrapCut™

https://www.amazon.com/WrapCut-Edge...ords=wrap+cut&qid=1556033190&s=gateway&sr=8-3

While you're at it... buy this cutter my wife has... CRICUT. Create, buy or use a bzillion free .SVG (vector files) of the web.https://www.amazon.com/Cricut-Explo...ywords=cricut&qid=1556571980&s=gateway&sr=8-5

I made this with it in about 20 mins... She would have made it in 5....

 

[Jeepney18]

While you're at it... buy this cutter my wife has... CRICUT. Create, buy or use a bzillion free .SVG (vector files) of the web.https://www.amazon.com/Cricut-Explo...ywords=cricut&qid=1556571980&s=gateway&sr=8-5

I made this with it in about 20 mins... She would have made it in 5....

I use a cricut too.

 

[Crusifix]

While you're at it... buy this cutter my wife has... CRICUT. Create, buy or use a bzillion free .SVG (vector files) of the web.https://www.amazon.com/Cricut-Explo...ywords=cricut&qid=1556571980&s=gateway&sr=8-5

I made this with it in about 20 mins... She would have made it in 5....

We actually have a Silhouette..but same thing.

 

[Scenic Route]

The flag decals are clear where they should have blue, so they don’t clash with the Ocean Blue.

 

[Crusifix]

Where did you get the schematic plate from? @Scenic Route


Never Mind, I found it.

 

[Scenic Route]

@Crusifix I got it from Hauk Industries https://haukoffroad.com/shop-by/jl-products/

 

[wrangster]

Looney Tunes! a fav of mine.

Sponsored