Sponsored

MOAB Edition JL Club Thread

p3rs1st

Member
First Name
Dan
Joined
Mar 8, 2019
Threads
2
Messages
16
Reaction score
37
Location
Quad Cities, Iowa
Vehicle(s)
2019 JLU MOAB Sting Grey
Vehicle Showcase
1
Very curious as well
I dont recall what it was on the trip home (100 miles highway) but since being in city driving and pressure at 33/34 I have been averaging 14.5 or so. I just recently upgraded to 35" tires and a 2.5" lift so we'll see if it stays around the same. So far it is.
Sponsored

 

NTX Black Moab

Well-Known Member
First Name
Tom
Joined
Mar 28, 2019
Threads
12
Messages
365
Reaction score
360
Location
DFW, TX
Vehicle(s)
2019 Jeep Moab (Black on Black)
Vehicle Showcase
1
I dont recall what it was on the trip home (100 miles highway) but since being in city driving and pressure at 33/34 I have been averaging 14.5 or so. I just recently upgraded to 35" tires and a 2.5" lift so we'll see if it stays around the same. So far it is.
GF still has the Jeep, but she'll be over on Saturday. I'll drop it down to 35 and see how it goes for a couple of weeks. It'll likely be early next year before I see any wheel / tire / suspension upgrades. Gonna go with an RK 2.5 Flex w/Fox Shocks, XD Rockstar III's in 20x10 and BFG KO2 in 35x12.50. We'll be adding the RSE Step Sliders at the same time.

Priority before wheels and tires:
a) ability to go topless: Lange Hoist, Alien Sunshade, some GPCA grab handles
b) recovery gear: winch and basics

Then we'll do the big suspension / wheel / tire / steps upgrade.
 

Bricazo

Well-Known Member
Joined
Mar 17, 2019
Threads
7
Messages
255
Reaction score
469
Location
New Jersey
Vehicle(s)
2019 Moab
4E4CD9D3-B1EE-4E06-8631-09E1F2C86E5E.jpeg
Stopped by the dealer for an oil change, looks like someone just bought a new Bikini!
I’m liking the black hood dome and fender fillers.. I’m getting color samples to try and match the grey w/ black boarder on my Moab badges. Did u install yourself? How difficult was it?
 

Jrwfarm

Active Member
First Name
James
Joined
Mar 5, 2019
Threads
2
Messages
26
Reaction score
22
Location
Farmington Kentucky
Vehicle(s)
2017 JKU 75th
57610490288__9714F898-44B1-49D9-98F5-58F358DD5AD7.JPG


Picked mine up today! Ordered March 5 and arrived at dealer on April 2. Question; Is there no cargo area mat included in the floor mat package?? My 2017 75th came with a nice reversible carpet or rubber mat for the cargo area.
 

Sponsored

Lecroj

Well-Known Member
First Name
Jon L
Joined
Feb 27, 2019
Threads
4
Messages
70
Reaction score
56
Location
Ridgefield CT
Vehicle(s)
2018 MOAB JLU, 2012 MDX, 2010 Mini
57610490288__9714F898-44B1-49D9-98F5-58F358DD5AD7.JPG


Picked mine up today! Ordered March 5 and arrived at dealer on April 2. Question; Is there no cargo area mat included in the floor mat package?? My 2017 75th came with a nice reversible carpet or rubber mat for the cargo area.
Mine didn’t. Had to order one,
 

robaw

Well-Known Member
First Name
Rob
Joined
Oct 26, 2018
Threads
12
Messages
1,611
Reaction score
2,128
Location
Iowa
Vehicle(s)
2019 JLU MOAB (MOJITO!), 2009 Honda CBR600RR
I’m liking the black hood dome and fender fillers.. I’m getting color samples to try and match the grey w/ black boarder on my Moab badges. Did u install yourself? How difficult was it?
I did put them on myself, got them from https://www.pixeldecals.com/. The ones for the vents were a piece of cake. The hood was a little more involved - had to take the hood insulation out and remove the wiper nozzles and hood tie-downs, and took some finesse to get the flat vinyl to fit the curves of the hood (I used a hair dryer).
Also - I don't think you'll want grey to match the Moab badges. Matte black for the inside and glossy black for the border should match pretty well.
 

Sponsored

Lecroj

Well-Known Member
First Name
Jon L
Joined
Feb 27, 2019
Threads
4
Messages
70
Reaction score
56
Location
Ridgefield CT
Vehicle(s)
2018 MOAB JLU, 2012 MDX, 2010 Mini
yep - bought Husky until that interfered with Tuffy install. Cargo room way too limited, so trying Backbone next and Husky should fit.
I went with the Weather Tech rear mat but it is a bit plastic-like for my taste. If I did it again I would get the Quadratec Ultimate which looks more rubber-like and more rugged looking.
 

robd1438

Well-Known Member
First Name
Rob
Joined
Nov 15, 2018
Threads
24
Messages
164
Reaction score
188
Location
Portland, CT
Vehicle(s)
2018 Wrangler JLU MOAB
Vehicle Showcase
1
Are there any mats for the back that work with the trail rail management system?
 

Bricazo

Well-Known Member
Joined
Mar 17, 2019
Threads
7
Messages
255
Reaction score
469
Location
New Jersey
Vehicle(s)
2019 Moab
I did put them on myself, got them from https://www.pixeldecals.com/. The ones for the vents were a piece of cake. The hood was a little more involved - had to take the hood insulation out and remove the wiper nozzles and hood tie-downs, and took some finesse to get the flat vinyl to fit the curves of the hood (I used a hair dryer).
Also - I don't think you'll want grey to match the Moab badges. Matte black for the inside and glossy black for the border should match pretty well.
Dan is sending me a grey sample to see how it looks. I always have to be different! Lol . I believe your badges maybe a different color mine are actually grey. if I don’t like it then I’m doing like u suggested

moab.jpg
 
Last edited:

robaw

Well-Known Member
First Name
Rob
Joined
Oct 26, 2018
Threads
12
Messages
1,611
Reaction score
2,128
Location
Iowa
Vehicle(s)
2019 JLU MOAB (MOJITO!), 2009 Honda CBR600RR
Dan is sending me a grey sample to see how it looks. I always have to be different! Lol . I believe your badges maybe a different color mine are actually grey. if I don’t like it then I’m doing like u suggested

moab.jpg
Hmm, mine do look a little different maybe, but could be lighting...
8BDCD1CD-BFB8-4AA0-A6AF-A4CB3628B250.jpeg
Sponsored

 
 



Top