Mopar Tailgate Table Installation Writeup

[TrailTorque]

It was driving me nuts and I felt like an idiot when I finally figured it out. LOL.

It’s all good man you live and you learn! Thanks again for passing on the knowledge!

Sponsored

 

[SmartStopStart.com]

I mounted a small piece of solid red 2mm thick Plexiglas behind the jeep cutout on the Mopar Tailgate Table. I am really happy with how it turned out!

Here is a source for a small sheet from China for $6.99 which can be cut to size: https://www.ebay.com/itm/2mm-Black-Red-Blue-Green-White-Acrylic-Plexiglass-Perspex-A5-148mm-x-210mm-1PC/142412226442?ssPageName=STRK:MEBIDX:IT&_trksid=p2060353.m2749.l2649

 

[Pink Brit]

I mounted a small piece of solid red 2mm thick Plexiglas behind the jeep cutout on the Mopar Tailgate Table. I am really happy with how it turned out!

Here is a source for a small sheet from China for $6.99 which can be cut to size: https://www.ebay.com/itm/2mm-Black-Red-Blue-Green-White-Acrylic-Plexiglass-Perspex-A5-148mm-x-210mm-1PC/142412226442?ssPageName=STRK:MEBIDX:IT&_trksid=p2060353.m2749.l2649

Nice touch!

 

[TrailTorque]

@SmartStopStart.com

Very cool!

 

[wrangster]

I need one of these for tailgating! soon.

 

[TrailTorque]

I need one of these for tailgating! soon.

Yes, yes you do!

 

[BuyMoparts]

@MORTON

Great write up.

 

[BuyMoparts]

I need one of these for tailgating! soon.

Check out @outdoortree set up that he uses along with the Mopar Accessory Table... Other people sharing as well!

 

[TrailTorque]

@MORTON

Great write up.

Thanks buddy!

 

[D60]

I just couldn't get behind the alleged cupholders and filled 'em. A 3.125" hole saw makes a nice 3" circle to fill the holes. I used some scrap 16ga laying around.

4 tacks ea, rattle can, done

 

[IronScott]

I just couldn't get behind the alleged cupholders and filled 'em. A 3.125" hole saw makes a nice 3" circle to fill the holes. I used some scrap 16ga laying around.

4 tacks ea, rattle can, done

Nice change. Those massive cup holder holes is what kept me from buying it (got the Spring Tail instead). You solution is very professional looking. Great job!

 

[TrailTorque]

I just couldn't get behind the alleged cupholders and filled 'em. A 3.125" hole saw makes a nice 3" circle to fill the holes. I used some scrap 16ga laying around.

4 tacks ea, rattle can, done

Very nice!

 

[bpdunsta]

Does anybody have this installed along with the Trail Rail Management System?

 

[wrangster]

Yes, yes you do!

Got one on Amazon and installed it the next day. Very happy with the Mopar kit and I doubt it will ever rattle!

 

[TrailTorque]

Got one on Amazon and installed it the next day. Very happy with the Mopar kit and I doubt it will ever rattle!

Extremely solid! Nice choice man hopefully my write-up was able to assist you during installation!

Sponsored