35" and 37" JL pics with lift kit

[JEEPJL]

Looks awesome with the 37". Great Jeep man! Any issues at all with rubbing offroad (or onroad for that matter)

No ...drives like it doesn't know they are on !

Major off roading would probably get some rub hear and there but haven't gone that extreme yet with flexing

Love of the feel of the new height too !!

Sponsored

 

[WhyUMad]

‘19 JLU Rubicon, fully-loaded minus steel bumpers option. Rough Countey 2.5” Coil Spacer Lift for now with 37x12.50r17 Toyo R/T’s & Mopar 17” Fake Beadlocks.

 

[Brosef]

2.5” lift and 37” mastercraft courser MXT’s. Went with the adjustable fox RR shocks from Accutune - ride quality is phenomenal

 

[WhyUMad]

2.5” lift and 37” mastercraft courser MXT’s. Went with the adjustable fox RR shocks from Accutune - ride quality is phenomenal

Woah, when did Fox come out with their 2.0’s w/RR’s?! They’re not listed on Fox’s site yet & I was told by Fox last week they wouldn’t be out for a few more months....I wonder if they’re using a different set & made them work for the JL platform. How do they ride? What lift did you go with? I’ve been waiting for then to come out. I was probably going to go with the non-adjustable ones.

Looks great btw.

 

[Brosef]

Woah, when did Fox come out with their 2.0’s w/RR’s?! They’re not listed on Fox’s site yet & I was told by Fox last week they wouldn’t be out for a few more months....I wonder if they’re using a different set & made them work for the JL platform. How do they ride? What lift did you go with? I’ve been waiting for then to come out. I was probably going to go with the non-adjustable ones.

Looks great btw.

You’re right on. Accutune essentially created this figment with some tweaks. I believe the fronts are just the old jk rears and the new rears are something else. I couldn’t be happier with them. They ride impeccably well and I love having the adjustability. You can tweak all 4 corners in less than a minute.

On lift, i pieced it together with the following
- Ready Lift spacer lift (2.5” front, 2” rear)
- Metal Cloak control arms (all 8)
- Metal Cloak front and rear adj. track bars
- Metal Cloak rear sway bar links (ended up needing those to clear the shocks).

 

[WhyUMad]

You’re right on. Accutune essentially created this figment with some tweaks. I believe the fronts are just the old jk rears and the new rears are something else. I couldn’t be happier with them. They ride impeccably well and I love having the adjustability. You can tweak all 4 corners in less than a minute.

On lift, i pieced it together with the following
- Ready Lift spacer lift (2.5” front, 2” rear)
- Metal Cloak control arms (all 8)
- Metal Cloak front and rear adj. track bars
- Metal Cloak rear sway bar links (ended up needing those to clear the shocks).

Awesome! Thank you for the feedback. That’s what I intend on doing, just very cautious now because there’s a few people having bad luck with death wobble after installing new components. My RC 2.5” spacer lift & adj. track bar have 0 issue & it drives great. I might add the shocks next K then do control arms, etc. piece by piece. I’m going to call them tomorrow to see what they’d recommend, because typically I would just leave it on whatever initial setting..but then again, it allows me to tweak the ride as I change parts too. m

Thanks again man!

 

[JLRoachicon]

3.5" Teraflex ST3 Sport lift with Falcon 3.1 shocks, Toyo Open country MT 37X13.5R17 on Method Grids in Titanium

Before:

After:

 

[dspilman]

3.5’ Teraflex ST3 Sport lift with Falcon 3.1 shocks, Toyo Open country MT 37X13.5R17 on Method Grids in Titanium

Before:

After:

I think I've commented on yours before, but this is one of my favorite rigs on here. I definitely took inspiration from your setup for what I'm putting together. Based on our talk, I decided to go with the 13.5s haha. Here's what I have in the works, should have it all installed next week:

Mopar 2" Lift Kit (box currently sitting in my living room)
Method MR606 Mesh (very similar to your grids) 20x10 -24mm Matte Black
Cooper STT Pro 37x13.5R20 (in shipping right now)

 

[JLRoachicon]

I think I've commented on yours before, but this is one of my favorite rigs on here. I definitely took inspiration from your setup for what I'm putting together. Based on our talk, I decided to go with the 13.5s haha. Here's what I have in the works, should have it all installed next week:

Mopar 2" Lift Kit (box currently sitting in my living room)
Method MR606 Mesh (very similar to your grids) 20x10 -24mm Matte Black
Cooper STT Pro 37x13.5R20 (in shipping right now)

I can’t wait to see it, especially on your 2 door. I don’t think you’ll regret 13.5 on the 20’s. I haven’t yet.
Thanks for taking inspiration. I can’t seem to post enough pics of mine haha.

 

[RMojitoJL]

2018 JLUR
2” Mopar lift
37 x 12.50 x 17” Nitto Ridge Grapplers
Quadratec Hard Rock wheels
Had the dash, shocks, and tailgate reinforcement kit painted firecracker red

Did you paint and add new stickers over the shocks to look factory? Or did your painter tape them off pre-paint?

 

[FLECK-5]

Did you paint and add new stickers over the shocks to look factory? Or did your painter tape them off pre-paint?

I believe they pulled the stickers off before painting, then reapplied the stickers.

 

[RWJLSAHARA]

2018 JLU Sahara Granite Crystal
2" MOPAR Lift
37" Toyo Open Country MT
MHT Fuel Off-road Coupler 17x9
Anti Rock Sway Bar

Putting the lift to work with the new Anti Rock Sway bar

 

[Seanst34]

37 x 12.5 r18 BFG KM3s on Fuel Hardline 18 x 9 wheels and 2” Mopar lift.

 

[travisp25]

Just got it done over the weekend...

2018 JLU Rubicon
2" Mopar Lift
Fuel Assault 20x12
35x12.5R20LT Nitto Ridge Grappler

Thanks Roky and pjs1inc for the help and suggestions!

 

[JLRoachicon]

37 x 12.5 r18 BFG KM3s on Fuel Hardline 18 x 9 wheels and 2” Mopar lift.

Man, that’s a beautiful rig!!!!! Nice job Sean. Don’t forget to change your vehicle description, lol

Sponsored