No name JLUR build!

[e92miami]

Well got the #8's mounted on the beadlocks and on the jeep! removed the undersides of the fenders and i'm quite happy with the look.

Excuse me for the possible nob questions but removing the underside of your fenders look great but are they now flimsy? Also what are going to do about front blinkers?

Sponsored

 

[5280Sapper]

Used the Artex fender chop pieces works like a champ!

Excuse me for the possible nob questions but removing the underside of your fenders look great but are they now flimsy? Also what are going to do about front blinkers?

 

[5280Sapper]

Well its been a long time since I've updated this.. I moved and got divorced and many things have also happened so didn't have much time get on here and post things..

 

[5280Sapper]

some more random pics with the 38's and beadlocks no lift and my own sliders.

 

[5280Sapper]

couple more

 

[5280Sapper]

Did the Motobilt spare tire delete and painted it with a paint I found at home depot that damn well near matches perfectly!

 

[5280Sapper]

few more pics for random trips.. I don't normally take pics and pose so they are random and weird for others taking them.

 

[5280Sapper]

I did the Rusty's track bar brace.. mine didn't show any signs but i also cleaned it up and ran a few passes with my TIG welder and then added the brace for good measure.

 

[5280Sapper]

I ended up doing a lift and pieced it together few days ago actually. Rock Krawler triple rate 2.5" sprigs and Teraflex 1/2" spacer on the front also. Used the Falcon bump stops and Falcon 3.1 shocks, MetalCloak front shock relocation and CAD skid and steering stabilizer relocate, SteerSmarts YETI XD tiered and drag link, Falcon JK 2.2 steering stabilizer MetalCloak front and rear track bars and MetalCloak control arms.

 

[5280Sapper]

Got my Jeep aligned on Friday and drover it around and checked things over took it to China Wall an easy trail west of Denver with some friends and it did fine. need to play with things and get it dialed in. I'm going to work on getting it to stuff and flex as much as possible but we just got a bit of snow so once it melts I'll play with it.

 

[5280Sapper]

nothing really seems to be hard anymore it was awesome stock but now it twists a bit more and I don't hang up the belly on stupid things.

 

[5280Sapper]

So i did this B&M shifter for the T Case and thought it was the biggest waste but I needed to try it because I sit far back and hate reaching and taking my eyes off the road to shift the T Case. well this is the solution.. the leverage is awesome, its almost parallel to the trans shifter you don't need to look for it to shift. Install was literally 10 minutes. And so far worth it. my knee doesn't hit it and so far no complaints.. I used a coupon and got it way cheaper then advertised.

 

[Razor323]

From a fellow 12B thanks for your service and awesome jeep I have same color JLUR

 

[5280Sapper]

Sappers Lead The Way!!!

From a fellow 12B thanks for your service and awesome jeep I have same color JLUR

 

[Razor323]

Sappers Lead The Way!!!

Essayons

Sponsored