americonium
Well-Known Member
- Thread starter
- #1
WARNING: This is for entertainment purposes only. If you order all of this stuff to make the harness work and it doesn't, well, that's on you. Sorrynotsorry...
You will need the following from Mouser.com
Mouser part number
538-33482-3601 male plug
538-33000-1002-LP male pin
You will need 2 male plugs and if you can crimp perfectly, you will need six male pins. I highly suggest ordering at least ten.
Next, depending upon which LED headlight you have, you will need either an H4 or an H13 plug. These can be purchased with wire from Amazon, you will need the Female version.
H4: http://a.co/d/1KXBb2c
H13: http://a.co/d/9ufK7vC
These are examples. You can use any Female plugs.
Most LED Headlights have the anti-flicker built in now, but you can also buy those and install the Mouser plugs on them.
I will post pictures and more details when I have the parts in my hand.
You will need the following from Mouser.com
Mouser part number
538-33482-3601 male plug
538-33000-1002-LP male pin
You will need 2 male plugs and if you can crimp perfectly, you will need six male pins. I highly suggest ordering at least ten.
Next, depending upon which LED headlight you have, you will need either an H4 or an H13 plug. These can be purchased with wire from Amazon, you will need the Female version.
H4: http://a.co/d/1KXBb2c
H13: http://a.co/d/9ufK7vC
These are examples. You can use any Female plugs.
Most LED Headlights have the anti-flicker built in now, but you can also buy those and install the Mouser plugs on them.
I will post pictures and more details when I have the parts in my hand.
Sponsored