TopPinArcher
Well-Known Member
Laid the stock 33’s up against the 37’s.. interesting perspective
Sponsored
Do you park on the right side of your garage? Nerdy question I guess..To the naked eye, no. I haven't measured it, though. Looking at it from behind, while in the garage, it looks level.
I've parked on both the right and left. Mostly left.Do you park on the right side of your garage? Nerdy question I guess..
what's the height from the center of skid plate of gas tank to the ground?Laid the stock 33’s up against the 37’s.. interesting perspective
what's the height from the center of skid plate of gas tank to the ground?
I measured about 20 1/2”... one of the measurements that surprised me is the 37” KO2’s mounted with 33 psi measure 35, the spare measures 36.5.... going to chalk test today.. I’ll check some other threads but this is my 1st set of KO2’s, these are D’s so I’m trying to find a good road PSI
I measured about 20 1/2”... one of the measurements that
Pretty sure it’s 20.5”... is that the spot you’re looking for?.. I went fuel tank center to groundI measured about 20 1/2”... one of the measurements that surprised me is the 37” KO2’s mounted with 33 psi measure 35, the spare measures 36.5.... going to chalk test today.. I’ll check some other threads but this is my 1st set of KO2’s, these are D’s so I’m trying to find a good road PSI
Love those wheels! I really like the stock Rubi wheels but these are a close second. First time I’ve seen them used in the wild. Wish the stockers were wider.My 37's went on today. Wow what a difference. I've read from so many here that the 37's don't really impact driving and it seems like everyone is correct. I could tell that there was bigger tires but it really didn't slow the Jeep down. Acceleration and stopping was nearly unchanged. I used the RC spare tire bracket but I have a Mopar reinforcement and relocation bracket coming. This tire would not have fit without some sort of bracket. I raised the 3rd brake light and it fits fine. Love the look.
That looks really good....nice jobJust got my wife’s Jeep finished. 3 1/2” lift, extended front drive shaft, 35”, -18 offset, Fuel Cleavers, Mastercraft Courser MXT 35x12.50x20, Barricade front bumper with winch, ridgid light bar and pods. Oracle under body lights. Also powder coated the lift components all red. She’s happy and ready to get it dirty!!! And maybe even get a little dirty. Lmao. Now waiting on Roam rock sliders/steps and a rear bumper when someone makes one.
I felt the same way. I really wanted to keep the stock ones but these still keep the Jeep feel. I debated getting black lugs but I like the silver ones. Thanks for the compliments.Love those wheels! I really like the stock Rubi wheels but these are a close second. First time I’ve seen them used in the wild. Wish the stockers were wider.
Thinking about the kmc machetes or the kmc rage beadlocks. Any trouble with install??2.5 evo overland boost kit (for now)
Kmw machete bead lock
37x13.50x17 copper STT PRO
More to come
Thinking about the kmc machetes or the kmc rage beadlocks. Any trouble with install??
How is the ride did you loose power from. Stock did you get a hybrid . How does. Ride compare to 33 what difference do you not rice I am using it as my daily driver what are your thoughts.
Here is a JLU w/ the 2” lift and 35s: