Post pics of your Rubicon on 35s no lift

[Cypher]

2020 JLUR diesel on 315/70/17 KO2, Method MR313 +25mm wheels. No lift.

Mine will be very close to this.. I have Method MR702 wheels going on tomorrow with Nitto Rodge Grapplers. Also Punk'n. Will post pictures when done. I have pictures of mine on factory wheels with 315/70/17 Ko2, as well as factory wheels with factory Falcon M/T, and soon to be with the Methods.

Sponsored

 

[Cypher]

Here is my 2020 JLUR with no lift. I have pictures of it 100% stock with factory 33" Falcon M/T, with 315/70/17 Ko2 on factory wheels with no lift, and then with Method MR702 wheels and 315/70/17 Nitto Ridge Grapplers with no lift

 

[jdhjeep]

Just had the Cooper STT Pro tires installed, could not be happier with them.

Looks great! Any pics straight on from the front and back? Curious to see the offset.

 

[Trojan_Actual]

Damn that looks good!

 

[Dengar]

Had my 35's installed on Tuesday. Very happy with the results. BF Goodrich KO2s 35x12.5x17. No lift.

 

[JeffI]

Can anyone post a close up pic around the rear wheel well like this with a KM3? Just want to see how much space you have. Also maybe how much clearance you have from top of tire to the bottom of fender liner. Thanks

 

[CM⛰]

Icon Rebound in Titanium 315x70r17 Cooper STT Pros No Lift

 

[JW12]

2-Door Rubicon on 35" tires w/ no lift. The first picture is just before installing a 2.5" TF lift and the second shows how far the 12.5" tire sticks out compared to the stock 33" Falkens on stock Rubi wheels.

 

[Yadirayadira]

18" Wheels on 35"s

How is the drive compared to stock?

 

[JeffI]

35 x 12.50 KM3
AEV Saverge 2

 

[ReidJL75]

 

[SGME9]

This is with 315/70R17 no spacers or lifts. I have full articulation with no rubbing.

 

[cweed917]

Fuel Trophy w/BFG 35’s

 

[ChadTx]

Watch some of the early Lite Brite youtube vids. They did some serious wheeling with a stock no-lift JLUR on 35’s, before they upgraded to 38’s. They claim little to no rubbing. I had no questions after watching these.

Here is the thread to discuss the video: https://www.jlwranglerforums.com/forum/threads/video-of-jlur-on-chinaman-gulch.4656/

To save you a lot of time - 35’s work with no lift - even Mopar says this. If you go with 37’s you will need a 2” lift. I am still trying to decide between the 2 options. It’s not a trivial decision, cost is going to be several thousand $ so I want to get it right. I know if I go with 35’s I will always be wondering about 37’s and if I go with 37’s I fear it will be too high.

What did u end up doing?

 

[D90John]

I am currently saving to purchase a JLU Rubicon. I would like to see how a Rubicon looks on 35s with nno lift. I have been back and forth between just 35s, or 37s with a lift.

Might already be a similar thread, but I cold not find any.

Thanks

Sponsored