What did you do TO your Jeep JL today?

[SpookyXJ]

Installed Synergys track bar & sector shaft brace.

PSA this and my ORO Swayloc don't play well together. Had to shift over the swaybar to the driver side some and clearance the crap out of the TB brace. Also can't run the lower bolt on the brace.

The arm and sawbar lock were hitting the bracket. I could have flipped the sway bar over and run the actuator on the passenger side and have a lot more room but I would still have to grind some off the bracket just not as much.

 

[Aidencaster]

Finally received my 67designs rail mount base. Now I just have to get some mounts for it.

 

[GeoMSP]

I didn't think I was gonna like the RokBlokz mud flap kit in the red....I was wrong. They grew on me pretty quickly. Install is incredibly easy...front and rear. The rear brackets use 12 bolts per side, but I think they could've accomplished the same with fewer. Less is more.

I just went thru my first winter with my JLU Sahara. I've got the standard factory running board and in the winter, the snow really gets packed underneath the running board, melts in my garage and makes a mess. Have you driven in snow and do the mud flaps help keep snow from collecting under the running board? Thanks!

 

[Centurion07]

I generally pitch a tent after sundown too.

There was just no good way to word that. LOL

 

[Hudson]

Installed LOD Destroyer sliders on my JLR. Also, sun came out his week so on went the Sunrider. Love the easy instant convertible top.

 

[Yakpimp]

After a year with the lift sitting in my garage I finally got it put on along with some other parts

From MetalCloak

• JL Wrangler 2.5" Game-Changer Suspension (Rockport)
  
• Aluminum Rocker ExoSkin
• JL 4-Door Overland Rocker & Flip Step Kit
• UnderCloak Integrated Armor System
• JL Wrangler Rear Diff Cover [M220 | 3rd Gen D44] Rubicon Edition
• JL Wrangler Front Differential Cover & Skid Kit [ M210 | 3rd Gen D44 ] Rubicon Edition
• JL Wrangler M220 Rear Differential Skid Plate
• JL Axle Disconnect Skid Plate Upgrade Kit
• JL Longer Front Driveshaft
• SportGate Tire Carrier

Other

• 17" Fuel Vector matte Black Wheels
• BF Goodrich Mud Terrain T/A KM3 - 35x12.50R17

 

[uudog]

Got the jeep ready for summer and added tonue, crossmember cover and some storage to my 2 door, still need to put some finishing touches on the box and paint it.

Any issues putting the soft top down on the Tonneau cover?

 

[omg]

dead pedal and maximus 3 stinger.

This will be my last of goodies to install on JL for a while. Few folks i know are getting laid off already, i am afraid it feels like the economic effects of COVID-19 are going to be in full force in the weeks to come. [just being cautious]

 

[MyLilPonyJeep]

Lets see some pics of that viper!!

Lol Jeep fam about to throw me out, but you asked. Its a 2006 Gen3, built bottom end, paxton charged running about 5 psi, other bolt-ons, suspension, etc. Need to upgrade my fuel before I run more boost, but made about 720 RWHP

 

[MyLilPonyJeep]

Finished out this round of mods on the 3.0 eco diesel. Will be adding steer smarts tie rod and drag link with griffin attenuator next weekend. Will also add 2.5” lift when the manufacturers catch up with the diesel along with RSE electric sliders and a pair of LP9s on the front bumper. Here’s a list of the mods:

-Steer smarts track bar
-Synergy steering brace
-Warn VR 10s and winch plate
-Warn epic 1.5” fairlead
-Factor 55 pro link E with rope guard
-JCR bull bar
-AVS rock shield
-Tuffy security deck with tie downs and diamond plate mat
-15lb powertank
-1” teraflex spacers in the rear to offset sag from spare and gear
-Baja Designs XL80s on Ace risers
-Teraflex Alpha HD spare tire mount
-New ecodiesel badge
-Venomrex 17x9 wheels in black
-37x12.50 KM3s

I want to replace my stock bumper next and have been really considering a used take-off modular Rubi bumper. I just want to be able to add the winch, and with the knock bar it looks great!

 

[Gonzanc]

Thank you! You should go for it. I love the steel bumper option. It has really grown on me

 

[melendez69]

I just went thru my first winter with my JLU Sahara. I've got the standard factory running board and in the winter, the snow really gets packed underneath the running board, melts in my garage and makes a mess. Have you driven in snow and do the mud flaps help keep snow from collecting under the running board? Thanks!

I've yet to drive in any snow with the Jeep... we don't get much down here in these parts. I've since removed my mud flaps... but I've been on muddy trails & the dirt & mud collects under my side steps.

 

[WaldorfJL]

Added the 4th brake light ring. Amazon special, around $35. It wasn't made for the JL with the back up camera, but a quick cut with rotary tool fixed that. It's all plastic. I put a 3$ flash module in line so it blinkity blinks. Now I don't have to agonize over which tire cover to buy.

 

[Wanted33]

I had to pull fuse 97 to get the audio back on my Alpine system. Does that count?

 

[Focker]

After a year with the lift sitting in my garage I finally got it put on along with some other parts

From MetalCloak

• JL Wrangler 2.5" Game-Changer Suspension (Rockport)
  
• Aluminum Rocker ExoSkin
• JL 4-Door Overland Rocker & Flip Step Kit
• UnderCloak Integrated Armor System
• JL Wrangler Rear Diff Cover [M220 | 3rd Gen D44] Rubicon Edition
• JL Wrangler Front Differential Cover & Skid Kit [ M210 | 3rd Gen D44 ] Rubicon Edition
• JL Wrangler M220 Rear Differential Skid Plate
• JL Axle Disconnect Skid Plate Upgrade Kit
• JL Longer Front Driveshaft
• SportGate Tire Carrier

Other

• 17" Fuel Vector matte Black Wheels
• BF Goodrich Mud Terrain T/A KM3 - 35x12.50R17

That looks fantastic! Two thumbs and two big toes up :D
My wife is doing a similar build starting today with KM3 on Icon Compression wheels, Metal Cloak game changer 2.5 goes on tomorrow.