Rear reflector change to brake light mod

[Yorkie3621]

I have a Sport S with the rear bumper with backup sensors and the reflectors in the middle.
I plan on replacing them with the smoked lens led brake lights.

has anyone ever done this? What wire should I tap into?

Thanks for your help.

Sponsored

 

[Brooklynjlu2018]

I bought these im trying to figure out how the old reflectors come out i put a screwdriver around the edges but it doesn’t seem to wanna come out that way

 

[Yorkie3621]

I bought these im trying to figure out how the old reflectors come out i put a screwdriver around the edges but it doesn’t seem to wanna come out that way

I haven’t gotten around to it yet but it looks like you have to remove the bumper and pop them out from the back

 

[AnnDee4444]

This is awesome. I want to get some of these wired up as backup lights.

 

[AnnDee4444]

This is awesome. I want to get some of these wired up as backup lights.

only available with red LEDs

https://www.amazon.com/iJDMTOY-Full...N1V6/ref=cm_cr_arp_d_product_top?ie=UTF8&th=1

 

[Luis Angel Reyes]

They have one screw in the back.

 

[nerubi]

But did you need to remove the bumper to get to the screw? Disconnecting cables and removing all the bolts seems a little too much effort to me but if it can be done without removing the bumper then I'll do it.

 

[Brooklynjlu2018]

But did you need to remove the bumper to get to the screw? Disconnecting cables and removing all the bolts seems a little too much effort to me but if it can be done without removing the bumper then I'll do it.

The post originator told me that the bumper does have to come off its only a couple bolts im gonna do it soon. Waiting for the nice weather.

 

[Luis Angel Reyes]

No need to remove the bumper, just a large extension and good light to catch the screw.

 

[Mr.Smith]

Looks good. Would love to get the smoked to match my smoked tails and 3rd brake light. What wiring did you tap into. I'm not the greatest with electrical so dumb it down for me lol

 

[Brooklynjlu2018]

No need to remove the bumper, just a large extension and good light to catch the screw.

Im gonna look into this option

 

[Brooklynjlu2018]

Where did you tap into for the power. Trailer harness or the tail light

They have one screw in the back.

 

[Yorkie3621]

Where did you tap into for the power. Trailer harness or the tail light

i haven’t put them on yet. I’ll probably tap into the tail light or I may tap into the front fog lights and use them as rear fog lights

 

[Oracle_Designs]

Hey guys, we are currently working on integrated LED reverse lights to replace the rear bumper reflectors. However, our primary focus is on higher light output for rear reversal needs.

Feel free to check it out on our current thread as we are approaching the final engineering stages: https://www.jlwranglerforums.com/forum/threads/rear-bumper-integrated-led-reverse-lights.55888/

Sponsored